16-1202 Seymour Hot Spot Hi-Heat Resistant Spray Paint, White (12 oz)
Product Line: Hot Spot SKU: 16-1202DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$15.00
Temporarily out of stock for purchase on our website, more inventory arriving soon.
Want to be notified when this product is back in stock?
A heat resistant spray paint designed to withstand temperatures up to 1200F (648 C) on a continuous basis. Creates a porcelain-like bond at high temperatures. Resists peeling, loss of adhesion, and blistering. Must be heat cured at a minimum temperature of 400F for two hours. Do not use a primer.
UPC: | 043281001113 |
Part #: | 0000161202 |
Container Size: | 16 OZ |
Net Fill Wt. OZ: | 12 |
Net Fill Wt. G: | 340 |
Prop 65 (cancer): | yes |
Prop 65 (repro): | yes |
Safety Data Sheet: | View Safety Data Sheet |
Product Information Sheet: | View Product Information Sheet |
Question
Cory –
Is this gloss or flat
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Hi this product has a flat color finish.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Richard –
Is this food grade paint
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It is not approved by the USDA food inspection service for incidental food contact.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ken Mueller –
Do recommend for grills? What primer do you use?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it works on grills anywhere EXCEPT the grate where the food is placed. No primer required.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
SUZANNE –
how do I cure this product?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
You can bake it at 400F for a couple hours or just let it air dry (will take much longer). Heat lamps also work.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Edwin –
Do you carry this product in semi-gloss and do you recommend it for boiler burners
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
The Hot Spot products are flat finishes only. I would not recommend it for the actual burners.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ed –
cast blast 1200 degree paint how long to air dry before heat cure.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
2 hours to cure.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Dee –
Does this paint wok on cast iron lawn furniture? It is painted white now and needs to be updated, there is chipped off area where it was painted and the cast iron is now showing. Thx
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, this paint is made for metal surface applications. It will work well, but the surface needs to be cleaned first and sanding may be required.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jenny –
I want to repaint the white burner plates on an old propane stove. There is no food contact with these plates. Would your hot spot paint work? Tha you
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, 16-1201 would work well for this application. The finish is flat, not glossy.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Andy –
I have a submersible wood stove (aluminum) for a hot tub. Is the product ok in water?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
The High Temperature Series (Hot Spot) was designed for the application to steel substrates, not aluminum. Not sure what the adhesion would be like on aluminum. We have not tested this product submersed in water. In either case, we would NOT recommend the 16-2668 for this application.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mauricio –
Can I use this to paint an automotive exhaust manifold?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, people use it for that application quite often.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Charles Weber –
What is the optimum drying time at 55F prior to heat curing?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
At that temperature you should probably give it 4 hours at least.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tom –
I see the grate comment below… will this work on stove top grates?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
As far as the 16-1201 Hot Spot Aluminum, it should NOT be applied to the burners of the stove grates.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Joe –
Will this paint ever cure if only heated to 215°
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it will cure no matter what. Itâs just with heat that process takes less time.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Charles Kutler –
Can the product be used on a kitchen cabinet to protect it from toaster oven heat?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
The paint doesnât act as an insulator. So, while the paint will resist the heat it wonât protect the substrate from the effects of heat if that makes sense.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
George Clarke –
How can I buy it
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Hello, you may purchase directly on our website or on Amazon. If you need additional information, please our customer service team at 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Paul Shain –
If I use an oven to cure after it dries for an hour, could there be an explosion hazard due to the fumes?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, please feel free to contact our tech support if you need additional information at 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Nick H. –
Would this be appropriate for the INSIDE of a grill or smoker. (Obviously not the cooking grate…)
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it is heat resistant to 1200F.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Pat –
Does the heat curing process give off hazardois fumes. I have an old oven I use for curing powder coating, so that should work, right?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
If you let the paint dry so you can handle the object, there would be next to no solvents remaining in the coating that would outgas during the baking process. You donât necessarily need to bake it as the paint will cure on its own (2-3 days in warm weather), but baking accelerates the process.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mike –
Could I paint inside of a Lincoln pizza oven with this the baffles food does not touch only hot air goes thru them
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, this paint would work in this application.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Eric –
Is this safe for use on the interior side of a gas grill lid? Won’t touch food but worried about noxious fumes once heat and possibly flame are in contact.
TIA!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our technical support for additional information 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ben Ma –
Will this work on gas stove grates, which will subject to flames
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, they would get too hot.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jim V –
can u use it on ceramic coated headers?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Would lightly scuff the headers first, but yes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Howard –
What is the flash time between coats?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint (verified owner) –
Flash point -4F
Dry Time*:
To touch 20 minutes
Hard Cure Must be heated to
400 F for two hours
*At 72F, 50% humidity,
1.5 mil thickness
**Curing/Recoat time is extended with
multiple coats and excessively thick coats**
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Michael –
Can you apply hotspot on a Hot Grill
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Michael –
I have a wood patio hood for bbq I want to paint it but not sure if the heat will destroy the paint
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
The Hot Spot goes to 1200F. It should hold up.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ed –
Can this paint be air cured or must it have heat ( 400 degrees)?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It will cure either way. Air cure just takes a couple days.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
James Dammann –
can I use this on stainless steel?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Renz –
Can I use this on my car intercooler?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes probably. It has a 1200F heat resistance.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Francine –
Can I use this paint on the inside of my fireplace? It’s a regular fireplace with chimney and some sort of stone or brick floor, back and sides. The fireplace was converted to natural gas but there is not any kind of metal insert. There is a burner pan, sand, lava rock, embers, and vented gas logs on a raised grate so no flames should touch the paint. Will this work for this application and if not, do you have something that will?
Thanks!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, this would work well on fireplace parts.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal