16-132 Seymour Hi-Tech Lacquer Spray Paint, Dull Aluminum Metallic (12 oz)
Product Line: Hi-Tech SKU: 16-132DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$13.00
A fast drying lacquer based spray paint that provides a smooth, even coat with minimal drip and long-lasting color. Highly durable and well suited for indoor and outdoor protection. Resistant to the effects of weather and many chemicals. Resists abrasion and heat up to 250F.
- Delivers a consistent spray pattern that provides an even coat and helps eliminate drips
- Works on Metal, Fiberglass & Wood
- Dries to Tack-Free in 5 min. 20 min to recoat.
- Up to 15 sq ft of coverage per can
UPC: | 043281000291 |
Part #: | 0000160132 |
Container Size: | 16 OZ |
Net Fill Wt. OZ: | 12 |
Net Fill Wt. G: | 340 |
Prop 65 (cancer): | yes |
Prop 65 (repro): | yes |
Safety Data Sheet: | View Safety Data Sheet |
Product Information Sheet: | View Product Information Sheet |
Question
Steve Long –
Do you still make 16-395 interior white for old Mustangs AP 5767
(0) (0)
Answer
Seymour Paint –
Hey there our 16-395 is a custom blend product that can be used to mix your own paint. Please call our technical team at 815-895-9101 to help you find the correct product.
(0) (0)
Question
Mark Massie –
what primer should be used and does it need a UV clear for outdoors?
(0) (0)
Answer
Seymour Paint –
Yes, I would use our 16-831 light gray primer. Clear coating is tricky. You can use the 16-821, but make sure to apply VERY LIGHT coats at first before applying a proper coat or two. If you put too much on the gold, it will diminish the bright leafing look.
(0) (0)
Question
Shawn Mann –
Hello Seymour,
Is your aerosol lacquer available in a vintage color code ( say L-345 VW light gray , 1960) ?
(0) (0)
Answer
Seymour Paint –
Hi there, not sure if we would have an exact match, please contact our technical support. We are developing a new program to custom match colors, please check back in a few months.
(0) (0)
Question
Rex Franklin –
Do you have polar white acrylic #w1-18004?
(0) (0)
Answer
Seymour Paint –
We donât have a color by that name, please contact our technical support if you have further questions.
(0) (0)
Question
Ray –
What etching primer should I be using got this lacquer?
(0) (0)
Answer
Seymour Paint –
Our 20-1682 black self-etching primer. If you have further questions, please feel free to contact our technical team.
(0) (0)
Question
David Bodkin –
Can this be used to paint my wood guitar body? I need a durable primer and lacquer paint. Prefer matte black.
Thank you.
(0) (0)
Answer
Seymour Paint –
Yes, If the guitar body is glossy, lightly sand first with 600 grit before applying the lacquer.
(0) (0)
Question
Terri Laing –
Hi. What is the prep needed to do on a dark stained wood piece of furniture before spraying your white lacquer?
(0) (0)
Answer
Seymour Paint –
Hi there, just a light sanding with steel wool or sandpaper to improve adhesion. You should probably wipe down with a degreaser as well to remove any oils that might be on the surface from skin touching it.
(0) (0)
Question
Pete Hunt –
What is the best primer on aluminum (aircraft) for Seymour 16-132 Dull Aluminum Lacquer?
(0) (0)
Answer
Seymour Paint –
16-899 green zinc phosphate is specifically formulated to meet aircraft specifications for aluminum.
(0) (0)
Question
Marie Kavanaugh –
Can Seymour 16-821 Hi-Tech Lacquers Spray Paint, Gloss Clear with UV Resistant be sprayed on oil based paints? Thanks
(0) (0)
Answer
Seymour Paint –
Yes, but the oil-based basecoat paint must be fully cured or else you might get wrinkling.
(0) (0)
Question
Victor –
What clear coat would I use if I use a flat black
(0) (0)
Answer
Seymour Paint –
16-121 can be applied over any of our flat black paints.
(0) (0)