800-435-4482
16-89 Seymour Good-Grip, Slip-Resistant Spray Coating, Yellow (12 oz)
Product Line: Good Grip SKU: 16-89DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$17.50
Good Grip is designed to improve traction on most surfaces. Contains plastic beads to improve traction on most any surface. More durable than tape, resistant to oil and gas, and traffic ready in 24 hours. Meets the OSHA recommended static coefficient of friction (0.5).
- Meets the OSHA recommended static coefficient of friction (0.5).
- Ideal for ramps, marine docks, boats, steps, and more
- Dries to touch in 10 min
- Up to 10 sq ft of coverage per can
| UPC: | 043281000475 |
| Part #: | 0000160089 |
| Container Size: | 16 OZ |
| Net Fill Wt. OZ: | 12 |
| Net Fill Wt. G: | 340 |
| Prop 65 (cancer): | yes |
| Prop 65 (repro): | yes |
| Safety Data Sheet: | View Safety Data Sheet  |
| Product Information Sheet: | View Product Information Sheet |
Question
Rob Lopez –
Can I use this on black hard smooth plastic of which I need to have good grip?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, we would advise to sand the plastic first to improve adhesion.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Peter –
Can i use this on shoes and is it good for water too
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It cannot be used on shoes. The best use is on steps and flooring, whether it’s concrete, metal, or wood.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Louis Guarino –
Can this be sprayed on a Black galvanized metal pipe handrail that is smooth for a better grip?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, but lightly scuff the surface to improve adhesion.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Phyllis –
Does this work well on shower floor
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
16-81 Seymour Good-Grip should work in the shower. Care should be taken when applying. Be sure the floor is absolutely dry. In addition, shower floors are made of a wide variety of materials so test the product in a discrete area to make sure that the coating adheres well. Always use caution when there is a risk of falling.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
abdulrahman –
Can it be used on ceramic and porcelain tiles ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, however we would recommend scuffing up the tiles first to improve adhesion.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Don Ostler –
Can it be used on the back of a rug to prevent slipping on a hard tile floor?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, but there are tapes that will do that.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Steve Scott –
does it damage fiberglass surface’s
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, it does not affect fiberglass. However, you would likely want to scuff the fiberglass prior to application in order to improve adhesion.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ethan –
Can this be used on fiberglass boats. Also is it UV durable.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
The Good Grip can be applied to fiberglass but the fiberglass needs to be prepped properly. The fiber needs to be sanded to create the Good Grip to physically adhere to it. Fiberglass components are typically created using a mold and mold release agents are used to get the fiberglass out of the molds. It is that mold release that can cause problems for paint to stick to fiberglass unless the mold release is removed chemically or physically (by sanding). The Good Grip should have good UV resistance.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Leegan –
Can you use this on a slab of wood being used for a deadlift platform?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes. With a lot of use you may have to reapply the coating occasionally.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Nick H. –
Would you reccomend this for NEW wooden wheelbarrow handles?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, because it would probably wear off too quickly to be of any use in that regard.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Dana Morris –
Could you use on the bottom of your shoes if you worked in a kitchen
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, this would not work.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Declan lynch –
Is it good for stainless steel. And for outside all year around?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it would work well in these two applications.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Delano Erwin –
What do you recommend to prevent wood stairs from being slippery? Explain details of application of product please.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Just a light sanding to improve adhesion and then apply the good grip to a masked off area.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Duane Fercho –
Could I spray the plastic on my four wheeler with this? It’s all faded out and I want to renew the paint color.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
If it is hard plastic, then yes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mai –
I need to refresh parking markings? Can I use this on asphalt that is stained from oil? If not is there a product
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we don’t make a product that would adhere over oil-stained surfaces.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Kim –
Does it dry clear? I’m making a mosaic design on my front steps. Thank you for your time
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it’s clear, no haziness.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Susan Griffith –
I work in a restaurant. For bottom of shoes??? Slip resistance
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, it would not stick to the soles of the shoes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Van Le –
can this be used non pickleball paddle ton increase texture
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Would think you could, yes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Marlo –
Once applied what is the Finish texture??? Is it sandy?? or what’s it feel like when running your hands
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It is gritty.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Patricio Navarro –
May I use it in for a crossfit bar? the idea is to avoid sliping when bare hands. I saw that they are commonly sandy (in fact you hurt a little the hands if no grip is used)
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes. Good grip would be a perfect fit
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Kevin –
Can I use this on a pickle ball paddle surface to add more grit?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
You may however would think the coating would wear off rather quickly.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brock –
Would this work on carbon rims to reduce the slipping with tires?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jonathan Limon –
Is your product good to apply on a Stainless Steel material?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
A k –
Can this be sprayed on car tire tread for better traction on icy roads
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, no.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Rick –
Can you buy your product(Slip Resistant Coating) in Canada???
How long does the coating last till you reapply???
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal