20-1643 Seymour Big Rig Heavy-Duty Industrial Enamel Equipment Yellow (16 oz)
Product Line: Big Rig SKU: 20-1643DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$16.00
Big Rig enamels offer superior high solids coverage for fleet maintenance applications where maximum performance is required. It will not blister, flake, or crack. Prevents rust and corrosion while resisting heat, oil, gas, and abrasion.
- Ideal for vehicles frames, engine blocks, protecting metal structures and restoring equipment
- Resists heat, oil, gas, abrasions, and rust
- Protects and does not flake, blister or crack
- Comes in a wide variety of colors
UPC: | 043281006620 |
Part #: | 0000201643 |
Container Size: | 20 OZ |
Net Fill Wt. OZ: | 16 |
Net Fill Wt. G: | 454 |
Prop 65 (cancer): | yes |
Prop 65 (repro): | yes |
Safety Data Sheet: | View Safety Data Sheet |
Product Information Sheet: | View Product Information Sheet |
Question
Patrick Sheehy –
I am restoring a 1940 walker turner drill press. What is the difference between MRO and Big Rig? Which is better for industrial machine applications?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
MRO and Big Rig are essentially the same thing, just marketed to different industries. Feel free to choose either. If you have further questions, please contact our technical support at 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brandon R. –
How UV resistant is this?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It will hold up for years in sunny locations before you notice a loss of gloss and/or color.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Marcello E Cavallo Jr –
Is the school bus yellow a gloss ?? Iâm sorry if I missed it in the description, thank huh
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, itâs high gloss. no worries ð
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Dave –
I âme restoring a vintage 60’s Triumph motorcycle frame. Rear section is raw mild steel. Front section is original baked enamel. Will this work over both surfaces and will it hold up pretty well to chipping? I’m trying to avoid the cost of Powdercoating with is expensive and not very original but would like to know this paint will offer some hardened protection. I assume it should be used without a primer coat.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
You can use with or without a primer on new milled steel. If the enamel paint on the front is glossy you should probably wipe down with a chemical deglosser or wet sand with 600 grit to improve adhesion. For the topcoat, Iâd apply 2-3 light coats within 10 minutes of each other and then leave it to fully cure (72 hours).
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jeromey –
Can this be used on a semi truck frame that is already painted a different color without the fear of flaking or peeling or should the original paint be removed?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
As long as the paint youâre going over is free of dirt and grease and is oil based in nature, the big rig will stick to it permanently.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Marcello –
Can this be applied directly to bare metal without primer?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, people do this quite often. That said, I would only recommend that process over clean bare steel.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Shane –
How to know if the product is a gloss?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
This product has a flat or semi-flat finish depending on your terminology.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Gary –
Looking for semi gloss blk.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We donât have semi-gloss black in the Big Rig product line; however, you can find it in our HiTech enamel product line. #16-139 is the part number.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Logan –
What is the difference between Seymour MRO Industrial High-Solids Spray Paint and the Seymour Big Rig Heavy-Duty Industrial Enamel?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Similar high solids formula, different colors. Big Rig was designed for an automotive fit.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Wanda –
Can I paint the outside of my stove with this paint?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
I would think so. It has a continuous 300F heat resistance, which should be enough for the exterior surfaces. If need please contact our technical team for further information.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ramon Aviña –
Puedes mandar a Guadalajara Jalisco mexico
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Hello, please contact our sales team for further information at sales@seymourpaint.com.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jason –
Is this paint flat or gloss?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It is high gloss.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Fred Johnson –
I am looking at repainting my freightliner hood with the big rig fleet white. Do I need to clear coat on top of it? If so, what clearcoat do you recommend?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Itâs not necessary to clear coat, but if you do, please make sure the fleet white is FULLY CURED first. This could take anywhere from 3-7 days depending on thickness and drying conditions.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Steven Gerace –
Can you paint over it with any type of automotive urethane base coat clear coat paint??
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Once cured, yes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mike V –
Can I use this on the lower front bumper,the plastic valance of my F-150?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, but it should be primed with our PBE sandable primer first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tara Norris –
Is this waterproof?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, would consider 20-1661 Big Reg Detroit Diesel Alpine Green waterproof.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Michael –
2012 Freightliner cascadia red and where can I get it
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we donât have an exact match to that shade of red. If you need additional information, please contact our customer service team at 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Adam –
Is cold galv 20-1645 an enamel or a primer?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It is a primer but due to its high zinc content for corrosion protection it could be left as is.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bryan –
Does this have a wide fan pattern?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It has a cone shaped pattern. Would consider it normal, not wide like a vertical triangle.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
William Wharmby –
Iâm looking for a durable primer topcoat clear coat combination for my motorcycle restoration. Which of your products do you recommend?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
20-1661 is a high gloss. Would recommend 20-1631 light gray primer followed by the 20-1661. A clear coat is not necessaryâ¦â¦and is discouraged in this case as the alpine green is a superior coating to the clear we offer.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brady –
How closely does the big rig cast blast match the traditional cast blast?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Same color.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ken Neuhoff –
Does this march or do you have Craftsman tool box red ?!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Our best match to Craftsman red is 20-1642 apex red.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Emanuel –
Hi This one works on the calipers
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it is heat resistant enough to work on calipers.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Eric Hansen –
Can you paint over bare metal spots
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, so long as there is no existing rust.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Steve –
Does it come in Matt black
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Flat and matte mean the same thing—no sheen whatsoever.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mario –
No semi-gloss available ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Unfortunately, no.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Sean –
Semi gloss?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, but 620-1439 is a high solids semi-gloss black.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Marshsll –
I bought a truck from up north that has some surface rust on the undercarriage. My plan is to use Seymour rust converter and then topcoat with Big Rig gloss black. Should I first spray with Rust Kutter or equivalent before using a degreaser and then spraying the rust converter?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Would degrease it then wire brush or grind off as much rust as possible before using the rust converter.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tom unversaw –
Hi would you recommend this paint for a large toolbox? Iâm restoring my old toolbox that is in great condition.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes. My son did his toolbox with the same kind of paint, and it turned out great. Just give it upwards of a week to fully cure before putting back into service.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tony –
I’m replacing a Bender on a car. Would this be a good product?
To apply, I don’t have a decent vanish.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
You could try our PBE trim paintsâ¦.#20-1677 gloss black.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Joel –
Do you have a recommendation for painting over aluminum in regards to prep and primer?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
20-1681 self-etch primer over aluminum that has been cleaned, and any corrosive scale has been removed.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Varise –
Is cast blast for exhaust manifolds,dry in an oven ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, you could heat cure the manifold in an oven after you let it dry to touch for an hour or so first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Eric Anderson –
Do you offer Cat Yellow or ISX Red by chance?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
20-1642 is cummins red and 620-1443 is cat yellow.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal