800-435-4482
20-1686 Seymour Big Rig Heavy-Duty Industrial Enamel School Bus Yellow (16 oz)
Product Line: Big Rig SKU: 20-1686DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$16.00
Free shipping on orders over $50*
or Choose Where to Buy:
Big Rig enamels offer superior high solids coverage for fleet maintenance applications where maximum performance is required. It will not blister, flake, or crack. Prevents rust and corrosion while resisting heat, oil, gas, and abrasion.
- Ideal for vehicles frames, engine blocks, protecting metal structures and restoring equipment
- Resists heat, oil, gas, abrasions, and rust
- Protects and does not flake, blister or crack
- Comes in a wide variety of colors
| UPC: | 043281006583 |
| Part #: | 0000201686 |
| Container Size: | 20 OZ |
| Net Fill Wt. OZ: | 16 |
| Net Fill Wt. G: | 454 |
| Prop 65 (cancer): | yes |
| Prop 65 (repro): | yes |
| Safety Data Sheet: | View Safety Data Sheet  |
| Product Information Sheet: | View Product Information Sheet |
Question
Andy –
i live i genoa can i buy directly from your facility
(0) (0)
Answer
Seymour Paint –
Unfortunately, we only sell through distribution or online. Please contact our customer service team and they will help you find the nearest store.
(0) (0)
Question
Patrick Sheehy –
I am restoring a 1940 walker turner drill press. What is the difference between MRO and Big Rig? Which is better for industrial machine applications?
(0) (0)
Answer
Seymour Paint –
MRO and Big Rig are essentially the same thing, just marketed to different industries. Feel free to choose either. If you have further questions, please contact our technical support at 815-895-9101.
(0) (0)
Question
Brandon R. –
How UV resistant is this?
(0) (0)
Answer
Seymour Paint –
It will hold up for years in sunny locations before you notice a loss of gloss and/or color.
(0) (0)
Question
Marcello E Cavallo Jr –
Is the school bus yellow a gloss ?? I’m sorry if I missed it in the description, thank huh
(0) (0)
Answer
Seymour Paint –
Yes, it’s high gloss. no worries 🙂
(0) (0)
Question
Dave –
I âme restoring a vintage 60’s Triumph motorcycle frame. Rear section is raw mild steel. Front section is original baked enamel. Will this work over both surfaces and will it hold up pretty well to chipping? I’m trying to avoid the cost of Powdercoating with is expensive and not very original but would like to know this paint will offer some hardened protection. I assume it should be used without a primer coat.
(0) (0)
Answer
Seymour Paint –
You can use with or without a primer on new milled steel. If the enamel paint on the front is glossy you should probably wipe down with a chemical deglosser or wet sand with 600 grit to improve adhesion. For the topcoat, I’d apply 2-3 light coats within 10 minutes of each other and then leave it to fully cure (72 hours).
(0) (0)
Question
Jeromey –
Can this be used on a semi truck frame that is already painted a different color without the fear of flaking or peeling or should the original paint be removed?
(0) (0)
Answer
Seymour Paint –
As long as the paint you’re going over is free of dirt and grease and is oil based in nature, the big rig will stick to it permanently.
(0) (0)
Question
Marcello –
Can this be applied directly to bare metal without primer?
(0) (0)
Answer
Seymour Paint –
Yes, people do this quite often. That said, I would only recommend that process over clean bare steel.
(0) (0)
Question
Shane –
How to know if the product is a gloss?
(0) (0)
Answer
Seymour Paint –
This product has a flat or semi-flat finish depending on your terminology.
(0) (0)
Question
Gary –
Looking for semi gloss blk.
(0) (0)
Answer
Seymour Paint –
We don’t have semi-gloss black in the Big Rig product line; however, you can find it in our HiTech enamel product line. #16-139 is the part number.
(0) (0)
Question
Logan –
What is the difference between Seymour MRO Industrial High-Solids Spray Paint and the Seymour Big Rig Heavy-Duty Industrial Enamel?
(0) (0)
Answer
Seymour Paint –
Similar high solids formula, different colors. Big Rig was designed for an automotive fit.
(0) (0)
Question
Wanda –
Can I paint the outside of my stove with this paint?
(0) (0)
Answer
Seymour Paint –
I would think so. It has a continuous 300F heat resistance, which should be enough for the exterior surfaces. If need please contact our technical team for further information.
(0) (0)
Question
Ramon Aviña –
Puedes mandar a Guadalajara Jalisco mexico
(0) (0)
Answer
Seymour Paint –
Hello, please contact our sales team for further information at sales@seymourpaint.com.
(0) (0)
Question
Jason –
Is this paint flat or gloss?
(0) (0)
Answer
Seymour Paint –
It is high gloss.
(0) (0)
Question
Fred Johnson –
I am looking at repainting my freightliner hood with the big rig fleet white. Do I need to clear coat on top of it? If so, what clearcoat do you recommend?
(0) (0)
Answer
Seymour Paint –
It’s not necessary to clear coat, but if you do, please make sure the fleet white is FULLY CURED first. This could take anywhere from 3-7 days depending on thickness and drying conditions.
(0) (0)
Question
Steven Gerace –
Can you paint over it with any type of automotive urethane base coat clear coat paint??
(0) (0)
Answer
Seymour Paint –
Once cured, yes.
(0) (0)
Question
Mike V –
Can I use this on the lower front bumper,the plastic valance of my F-150?
(0) (0)
Answer
Seymour Paint –
Yes, but it should be primed with our PBE sandable primer first.
(0) (0)