800-435-4482
20-41 Seymour Professional Truck Bed Coating/Liner Aerosol Spray, Black (15 oz.)
Product Line: Automotive Specialty SKU: 20-41DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$11.00
Free shipping on orders over $50*
or Choose Where to Buy:
This product is a thick, durable Black coating and sealant that forms a protective layer that is both tough and flexible. Protects against corrosion and abrasion, withstands impacts, provides improved traction, and resists water. With its fast cure time and excellent adhesion, Seymour Truck Bed liner greatly extends Equipment and vehicle life expectancy.
- Ideal for use on your truck bed, trailer floor, fenders, wheel wells and repair existing liner coatings
- Specially formulated to apply a thick and durable coating that forms a long-lasting protective layer that is both tough and flexible
- Protects against rust, corrosion and abrasion, withstands impacts, provides improved traction, and resists water
- Fast cure time and excellent adhesion
- Dry times: (30-45 min. to touch), (8 -10 hrs. to handle), (24-36 hrs. to return service), (~4 day to full cure)
| UPC: | 043281008686 |
| Part #: | 0000200041 |
| Container Size: | 20 OZ |
| Net Fill Wt. OZ: | 15 |
| Net Fill Wt. G: | 425 |
| Prop 65 (cancer): | yes |
| Prop 65 (repro): | yes |
| Safety Data Sheet: | View Safety Data Sheet  |
| Product Information Sheet: | View Product Information Sheet |
Question
Scott tefft –
Can this be painted after it dries
(0) (0)
Answer
Seymour Paint –
Yes, but you would need a paint that is flexible, one that would expand and contract in the same way as the truck bed coating. An oil-based acrylic/vinyl type paint should work. Otherwise, you run the risk of cracking and peeling. Also, be sure let the truck bed coating fully cure before top coating.
(0) (0)
Question
Jeremy –
What colors do you have in the bed liner spray
(0) (0)
Answer
Seymour Paint –
Hey there, we only carry black bed liner.
(0) (0)
Question
Aaron Post –
When doing touch up what do I need to do to prep the existing surface besides just cleaning it?
(0) (0)
Answer
Seymour Paint –
Assuming the surface is free of rust a simple cleaning is all that is necessary. If there any spots that are glossy, they should be scuffed up to improve adhesion. If you have further questions, please contact our technical department at 815-895-9101.
(1) (0)
Question
SCOTT –
IS THIS PRODUCT ONLY FOR STEEL OR CAN IT BE USED ON WOOD OR FIBERGLASS?
(0) (0)
Answer
Seymour Paint –
It can be used on both wood and fiberglass iF they are primed first.
(0) (0)
Question
Miguel Parras –
Can this be used inside truck cab floor?
(0) (0)
Answer
Seymour Paint –
Yes, just be sure the surface is clean and if it’s glossy to scuff it up so proper adhesion is achieved.
(1) (0)
Question
Adam Irie –
Do you have a Pay Pal Option ?
(0) (0)
Answer
Seymour Paint –
Unfortunately, we only have credit card option only.
(0) (0)
Question
Omar –
Can it be applied more then 1 time to make it thickener
(0) (0)
Answer
Seymour Paint –
Yes, multiple coats are recommended to add protection and more closely replicate a spray-on bed liner application.
(1) (0)
Question
Douglas Deutsch –
How many cans would I need to do a 6.5′ bed?
(0) (0)
Answer
Seymour Paint –
One can covers between 10-15 square feet. I would suggest 4-6 cans for the entire truck bed to be safe!
Please make sure to calculate the area of your truck bed.
Example:
Assume a truck bed measures 48 inches in width by 96 inches in length.
We would calculate: 48 x 96 = 4,608.
We would then calculate: 4,608 ÷ 144 = 32, so our truck bed has an area of 32 square feet.
(0) (0)
Question
Nick carpentier –
Can I use this to repaint a already existing rhino liner. Make it look new again?
(0) (0)
Answer
Seymour Paint –
I think it could work. Not sure what the rhino liner is, but the truck bed coating is black with embedded rubber granules to give it texture.
(0) (0)
Question
Russ –
I got a 7×12 dump trailer if I sand it all out with sandblaster will this stick to it and how well how long will it last
(0) (0)
Answer
Seymour Paint –
For an area that size, the truck bed coating would not be cost effective to use spray cans (although it might be effective for getting into corners, etc.). While we don’t sell it in gallons, I would recommend finding this product for the main body of the trailer.
(0) (0)
Question
Ladon Miller –
Can it be used on rubber or plastic?
(0) (0)
Answer
Seymour Paint –
It can be used on hard plastic, but not rubber.
(0) (0)
Question
Jerry –
How many cans for a six foot bed. 05 f150
(0) (0)
Answer
Seymour Paint –
For a six-foot bed applied to an appropriate thickness you’d likely need a dozen or so.
(0) (0)
Question
Tony –
Can it be used on a jeeps hardtop?
(0) (0)
Answer
Seymour Paint –
Yes. You might want to scuff the hard top with steel wool to ensure proper adhesion.
(0) (0)
Question
Roni westray –
I have a utility body which had rust spots when I bought it new. Can I spray over the rust spots or will it come through?
(0) (0)
Answer
Seymour Paint –
You could apply the rust converting primer (#16-45) first and then topcoat with the truck bed coating and it shouldn’t come back. Wire brush as much of the rust off first though.
(0) (0)