620-1412 Seymour MRO Industrial High-Solids Spray Paint, Flat White (16 oz)
Product Line: MRO SKU: 620-1412$14.00
Seymour's MRO aerosols are high-solids, industrial-grade line of coatings specifically designed for Maintenance, Repair & Operations. This High-Solids formula provides long-lasting durability, does not run or sag and long-lasting corrosion protection in the toughest environments.
UPC: | 043281006705 |
Part #: | 0006201412 |
Container Size: | 20 OZ |
Net Fill Wt. OZ: | 16 |
Net Fill Wt. G: | 454 |
Prop 65 (cancer): | yes |
Prop 65 (repro): | yes |
Safety Data Sheet: | View Safety Data Sheet |
Product Information Sheet: | View Product Information Sheet |
Question
Van Andrew –
When will the 620-1449 dk green be available?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service department for lead times. Phone #815-895-9101 Thank you!
(0) (0)
Question
Kyle ZInger –
Where can I get access to the Safety Data Sheets for the majority of the MRO Industrial High-Solids Spray Paint product line?
(0) (0)
Answer
Seymour Paint –
You will find the safety data sheets under product specs of item or click on TDS/SDS tab on the right hand corner of our website.
(0) (0)
Question
Keith Paulson –
Do you have MRO SKU: 620-1417 in stock?
(0) (0)
Answer
Seymour Paint –
Currently, item is out of stock. Please contact our customer service regarding lead times.
(0) (0)
Question
Larry –
Do you plan on doing a satin black finish?
(0) (0)
Answer
Seymour Paint –
Not at this moment, we have product 98-24 in our Spruce line which has a satin black finish.
(0) (0)
Question
KALEB CASSETTY –
IS THIS PAINT BAKEABLEE TO IMPROVE AND SPEED UP DRY TIMES?
(0) (0)
Answer
Seymour Paint –
Yes, but no warmer than 150F. A heat lamp or setting the object outside in full sun also works.
(0) (0)
Question
chaz –
620-1446 Seymour MRO Industrial High-Solids Spray Paint, Ryder Yellow (16 oz) in stock?
(0) (0)
Question
chaz –
620-1446 in stock?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service at 815-895-9101 regarding inventory/stock.
(0) (0)
Question
Chuck Sharin Chuck’s Automotive –
May I assume that MRO aerosol high solids enamel is SEYMOURS most durable highest quality paint versus Acrylic LAcquer PBE……Asking that Seymour considerr adding a SEMI Gloss Black MRO
(0) (0)
Answer
Seymour Paint –
We truly appreciate your feedback. We are not expanding the MRO line at this time, but if you are interested in private labeling a Semi-Gloss Black MRO please reach out to our sales Department for more information. Sales@seymourpaint.com
(0) (0)
Question
Bruce –
We have a 21 rubicon that is hydro blue can you match that color?
(0) (0)
Answer
Seymour Paint –
Our 620-1426 would be a close match but not exactly the same. Please contact our technical team at 815-895-9101 for additional questions.
(0) (0)
Question
Miguel –
Can I use seymour 620 -1432 spray paint on fiberglass?
(0) (0)
Answer
Seymour Paint –
Yes, you can apply 620-1432 over PRIMED fiberglass. Iâd recommend our Spruce primers.
(0) (0)
Question
James manning –
Can I use your MRO to paint over a brass light fixture ? If so what prep would be required?
(0) (0)
Answer
Seymour Paint –
Yes, I would scuff the brass with a scouring pad or 400 grit sandpaper to help the paint adhere properly. A primer over the scuffed brass would also help.
(0) (0)
Question
Tammy –
Will this paint adhere to plastic and rubber?
(0) (0)
Answer
Seymour Paint –
It will not adhere to rubber as itâs too flexible. As for plastic, it will adhere to only the hard typesâ¦.and ideally the plastic is sanded and primed first.
(0) (0)
Question
Karla –
Which color is a closer fit to Mojave jeep. Omaha or JL orange?
(0) (0)
Answer
Seymour Paint –
Omaha orange would be the best match.
(0) (0)
Question
Benjamin –
Will this work as a rust inhibitor as well for existing areas where its started to show surface rust? Or jyst a preventor?
(0) (0)
Answer
Seymour Paint –
No, anywhere that is rusting should be sanded down, primed with our rust converting primer (#16-45), and then top coated with the MRO.
(0) (0)
Question
Martin –
Can i use it on plastic, no primer?
(0) (0)
Answer
Seymour Paint –
Product will adhere to only hard type plastic and ideally sanded and primed first.
(0) (0)
Question
Jim Pearson –
Do you have 620-1443 in stock?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service team for item availability 815-895-9101.
(0) (0)
Question
Daniel –
How is the lightfastness of this paint? Does it have any UV inhibitors?
(0) (0)
Answer
Seymour Paint –
This product doesnât have any UV inhibitors, but you could clear it with our 16-121 which does.
(0) (0)
Question
DAVE –
DO YOU SELL THESE BUY THE CASE OR JUST BY INDIVIDUAL CAN?
(0) (0)
Answer
Seymour Paint –
One case of our MRO products would be 6 cans. If you would like a distributor, please contact our sales department for more details at sales@seymourpaint.com.
(0) (0)
Question
Brian Zappala –
will this paint work long term as a boundary marking paint for trees
(0) (0)
Answer
Seymour Paint –
Yes, so long as itâs applied to a clean/dry/bare/hard surface.
(0) (0)
Question
Josh Padilla –
Can this product impact a cathodic protection system?
(0) (0)
Answer
Seymour Paint –
Yes, it would. Further, this product is not intended for use below the water line or on galvanized metal.
(0) (0)
Question
Lane Truett –
Is this paint a gloss finish? Industrial. MRO
(0) (0)
Answer
Seymour Paint –
620-1433 has a flat finish.
(0) (0)