620-1436 Seymour MRO Industrial High-Solids Spray Paint, JL Orange (16 oz)
Product Line: MRO SKU: 620-1436DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$16.00
Seymour's MRO aerosols are high-solids, industrial-grade line of coatings specifically designed for Maintenance, Repair & Operations. This High-Solids formula provides long-lasting durability, does not run or sag and long-lasting corrosion protection in the toughest environments.
- Extremely Durable, Industrial-Grade High-Solids spray paint, for all your projects when conventional spray paint just wont cut it
- Won't run or sag and resists oil, gas, heat, abrasion and sunlight
- High-Solids formulation for twice the coverage of conventional spray paints
- Dries to touch in 30 min. Hard Cure 2-3 days.
- Up to 18 sq ft coverage per can
UPC: | 043281008631 |
Part #: | 0006201436 |
Container Size: | 20 OZ |
Net Fill Wt. OZ: | 16 |
Net Fill Wt. G: | 454 |
Prop 65 (cancer): | yes |
Prop 65 (repro): | yes |
Safety Data Sheet: | View Safety Data Sheet |
Product Information Sheet: | View Product Information Sheet |
Question
Van Andrew –
When will the 620-1449 dk green be available?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service department for lead times. Phone #815-895-9101 Thank you!
(0) (0)
Question
Kyle ZInger –
Where can I get access to the Safety Data Sheets for the majority of the MRO Industrial High-Solids Spray Paint product line?
(0) (0)
Answer
Seymour Paint –
You will find the safety data sheets under product specs of item or click on TDS/SDS tab on the right hand corner of our website.
(1) (0)
Question
Keith Paulson –
Do you have MRO SKU: 620-1417 in stock?
(0) (0)
Answer
Seymour Paint –
Currently, item is out of stock. Please contact our customer service regarding lead times.
(0) (0)
Question
Larry –
Do you plan on doing a satin black finish?
(0) (0)
Answer
Seymour Paint –
Not at this moment, we have product 98-24 in our Spruce line which has a satin black finish.
(0) (0)
Question
chaz –
620-1446 Seymour MRO Industrial High-Solids Spray Paint, Ryder Yellow (16 oz) in stock?
(0) (0)
Question
chaz –
620-1446 in stock?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service at 815-895-9101 regarding inventory/stock.
(0) (0)
Question
Chuck Sharin Chuck’s Automotive –
May I assume that MRO aerosol high solids enamel is SEYMOURS most durable highest quality paint versus Acrylic LAcquer PBE……Asking that Seymour considerr adding a SEMI Gloss Black MRO
(0) (0)
Answer
Seymour Paint –
We truly appreciate your feedback. We are not expanding the MRO line at this time, but if you are interested in private labeling a Semi-Gloss Black MRO please reach out to our sales Department for more information. Sales@seymourpaint.com
(0) (0)
Question
Bruce –
We have a 21 rubicon that is hydro blue can you match that color?
(0) (0)
Answer
Seymour Paint –
Our 620-1426 would be a close match but not exactly the same. Please contact our technical team at 815-895-9101 for additional questions.
(0) (0)
Question
Miguel –
Can I use seymour 620 -1432 spray paint on fiberglass?
(0) (0)
Answer
Seymour Paint –
Yes, you can apply 620-1432 over PRIMED fiberglass. Iâd recommend our Spruce primers.
(0) (0)
Question
James manning –
Can I use your MRO to paint over a brass light fixture ? If so what prep would be required?
(0) (0)
Answer
Seymour Paint –
Yes, I would scuff the brass with a scouring pad or 400 grit sandpaper to help the paint adhere properly. A primer over the scuffed brass would also help.
(0) (0)
Question
Tammy –
Will this paint adhere to plastic and rubber?
(0) (0)
Answer
Seymour Paint –
It will not adhere to rubber as itâs too flexible. As for plastic, it will adhere to only the hard typesâ¦.and ideally the plastic is sanded and primed first.
(0) (0)
Question
Karla –
Which color is a closer fit to Mojave jeep. Omaha or JL orange?
(0) (0)
Answer
Seymour Paint –
Omaha orange would be the best match.
(0) (0)
Question
Martin –
Can i use it on plastic, no primer?
(0) (0)
Answer
Seymour Paint –
Product will adhere to only hard type plastic and ideally sanded and primed first.
(0) (0)
Question
Jim Pearson –
Do you have 620-1443 in stock?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service team for item availability 815-895-9101.
(0) (0)
Question
Daniel –
How is the lightfastness of this paint? Does it have any UV inhibitors?
(0) (0)
Answer
Seymour Paint –
This product doesnât have any UV inhibitors, but you could clear it with our 16-121 which does.
(0) (0)
Question
Josh Padilla –
Can this product impact a cathodic protection system?
(0) (0)
Answer
Seymour Paint –
Yes, it would. Further, this product is not intended for use below the water line or on galvanized metal.
(0) (0)
Question
Lane Truett –
Is this paint a gloss finish? Industrial. MRO
(0) (0)
Answer
Seymour Paint –
620-1433 has a flat finish.
(0) (0)
Question
Brad –
can it be used in very wet areas?
(0) (0)
Answer
Seymour Paint –
Yes. It just canât withstand continuous immersion in water.
(0) (0)
Question
Tim Lott –
Could this paint be used to paint laundry drop in sink?
(0) (0)
Answer
Seymour Paint –
No, the aluminum coating would rub off in time. I would recommend our 16-132 dull aluminum followed by our EN-70 clear—itâs meant for car engines but would work well here.
(0) (0)
Question
Steve Stanley –
Is this a gloss paint? Is it available in flat or satin? I’m looking for a gray enamel with a sheen similar to the Seymour Cast Blast.
(0) (0)
Answer
Seymour Paint –
It is high gloss. You could try the charcoal color in our roof paint line (#16-1703). It has a flat finish.
(0) (0)
Question
chris osvalds –
are replacement nozzels available for the MRO spray paints?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service regarding B-13 nozzles.
(0) (0)
Question
CHARLES FURNARI –
Are your paints work with rust-oleum enamel?
(0) (0)
Answer
Seymour Paint –
Yes. Assuming the Rustoleum paint is fully cured, you can topcoat with the MRO and not have to worry about an adverse reaction.
(0) (0)
Question
Pat Oates –
What High Solids Paint matches closely to Kubota Orange?
(0) (0)
Answer
Seymour Paint –
Because itâs more of a reddish orange, our EN-48 or 620-1432 would be a good match.
(0) (0)
Question
David Barnette –
I am trying to find a color that Duke energy has on the pad mount green and it is a seymour product. can you help me ?
(0) (0)
Answer
Seymour Paint –
Unfortunately, we do not carry however we can custom match. Please contact sales@seymourpaint.com for order minimums and pricing.
(0) (0)
Question
Pat Oates –
Which orange color matches Kubota
(0) (0)
Answer
Seymour Paint –
We donât have a color called Kubota orange, but 98-48 chevy orange is very close.
(0) (0)
Question
Holly Ramirez –
Can 620-1433 be used repaint inside the firebox?
(0) (0)
Answer
Seymour Paint –
It has a heat resistance of 300F continuously. If you donât feel that it would withstand that temperature, you could opt for #16-1203 black which goes up to 1200F.
(0) (0)
Question
Brian Coulston –
What are the storage requirements for MRO Product 6201413, white? Does this product require storage in a fire cabinet via OSHA or Fire Regulations?
(0) (0)
Answer
Seymour Paint –
It depends on how many cans. The NFPA publishes a guidebook that explains the requirements, please contact your local fire department for a recommendation. Aerosol cans should not be warehoused in subfreezing temperatures or exposed to temperatures above 120F.
(0) (0)
Question
Daniel Hicswa –
Hi are any of these stainless-steel paints available in Qt?
(0) (0)
Answer
Seymour Paint –
We have a 5-gallon pail part number 0-554. Please contact our sales team for more information at sales@seymourpaint.com.
(0) (0)
Question
Donovan Henry –
about to buy gloss white to do my wheels. I’m reading that you dont recommend a clear coat. I was going to use a 2k. Is that still not advisable or needed?
(0) (0)
Answer
Seymour Paint –
This has a high gloss finish and would work well by itself on the wheels. If you do decide to clear, give the white upwards of a week to fully cure first.
(0) (0)
Question
Donovan Henry –
Doing my wheels with this. Do I need a clearcoat? I was thinking of using a 2k
(0) (0)
Answer
Seymour Paint –
This has a high gloss finish and would work well by itself on the wheels. If you do decide to clear, give the white upwards of a week to fully cure first.
(0) (0)
Question
Milton –
This paint (SKU: 620-1411) is described and the can is labeled as enamel. I just bought a can on AMAZON but the can says its Lacquer (see photo). So what is it? I need paint that is chemical resistant and lacquer would not work.
(0) (0)
Answer
Seymour Paint –
It is a lacquer. It is the only color in MRO that is not enamel because it is a leafing aluminum. The only metallic we offer in high gloss enamel is EN-71 dull aluminum.
(0) (0)
Question
Fastenal Company –
is this sunbelt green 0006201437
(0) (0)
Answer
Seymour Paint –
Yes. We just canât call it that because of copyright concerns.
(0) (0)
Question
Rodeo –
Where can I find a list of carriers so that I can shop in person?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service team for information regarding distributors/stores.
(0) (0)
Question
Beth Holley –
What is the best acryllic latex spray paint to use on galvanized metal?
(0) (0)
Answer
Seymour Paint –
It depends on the project. What are you painting exactly?
(0) (0)
Question
Dustie –
Can u paint a truck with this stuff ?
(0) (0)
Answer
Seymour Paint –
Yes! MRO was specifically designed for metal and wood applications.
(0) (0)
Question
craig werum –
Can you paint plastic with MRO paint?
(0) (0)
Answer
Seymour Paint –
Yes, but only the hard type plastics that have been scuffed and primed first.
(0) (0)
Question
Lisa Taylor –
can you use this on furniture cloth?
(0) (0)
Answer
Seymour Paint –
No. This paint is not intended for fabric.
(0) (0)
Question
Gary Kolenich –
I’m painting Cammo graphics on my RV and it is outside. Would I need to tarp it?
(0) (0)
Answer
Seymour Paint –
No need to cover with a tarp because of our product. It has excellent durability in sunlight and weather.
(0) (0)
Question
Michael –
Can this be used on plastic ( hubcaps)
(0) (0)
Answer
Seymour Paint –
Yes, but only hard type plastics that have been scuffed up and primed.
(0) (0)
Question
Tom L. –
Dose this paint come in a matte or satin finish?
(0) (0)
Answer
Seymour Paint –
Sorry, just high gloss.
(0) (0)
Question
David –
Is there a protective clear that works with the Industrial MRO line?
(0) (0)
Answer
Seymour Paint –
We donât recommend it, but the EN-70 clear in the HiTech line is a compatible formula.
(0) (0)
Question
Tom –
What does SB Green look like and does SB stand for anything?
(0) (0)
Answer
Seymour Paint –
SB stand for SunBelt green, like the forklift company.
(0) (0)