800-435-4482
620-1441 Seymour MRO Industrial High-Solids Spray Paint, IHC Red (16 oz)
Product Line: MRO SKU: 620-1441DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$16.00
Seymour's MRO aerosols are high-solids, industrial-grade line of coatings specifically designed for Maintenance, Repair & Operations. This High-Solids formula provides long-lasting durability, does not run or sag and long-lasting corrosion protection in the toughest environments.
- Extremely Durable, Industrial-Grade High-Solids spray paint, for all your projects when conventional spray paint just wont cut it
- Won't run or sag and resists oil, gas, heat, abrasion and sunlight
- High-Solids formulation for twice the coverage of conventional spray paints
- Dries to touch in 30 min. Hard Cure 2-3 days.
- Up to 18 sq ft coverage per can
| UPC: | 043281008655 |
| Part #: | 0006201441 |
| Container Size: | 20 OZ |
| Net Fill Wt. OZ: | 16 |
| Net Fill Wt. G: | 454 |
| Prop 65 (cancer): | yes |
| Prop 65 (repro): | yes |
| Safety Data Sheet: | View Safety Data Sheet  |
| Product Information Sheet: | View Product Information Sheet |
Question
Van Andrew –
When will the 620-1449 dk green be available?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service department for lead times. Phone #815-895-9101 Thank you!
(0) (0)
Question
Kyle ZInger –
Where can I get access to the Safety Data Sheets for the majority of the MRO Industrial High-Solids Spray Paint product line?
(0) (0)
Answer
Seymour Paint –
You will find the safety data sheets under product specs of item or click on TDS/SDS tab on the right hand corner of our website.
(0) (0)
Question
Keith Paulson –
Do you have MRO SKU: 620-1417 in stock?
(0) (0)
Answer
Seymour Paint –
Currently, item is out of stock. Please contact our customer service regarding lead times.
(0) (0)
Question
Larry –
Do you plan on doing a satin black finish?
(0) (0)
Answer
Seymour Paint –
Not at this moment, we have product 98-24 in our Spruce line which has a satin black finish.
(0) (0)
Question
KALEB CASSETTY –
IS THIS PAINT BAKEABLEE TO IMPROVE AND SPEED UP DRY TIMES?
(0) (0)
Answer
Seymour Paint –
Yes, but no warmer than 150F. A heat lamp or setting the object outside in full sun also works.
(0) (0)
Question
chaz –
620-1446 Seymour MRO Industrial High-Solids Spray Paint, Ryder Yellow (16 oz) in stock?
(0) (0)
Question
chaz –
620-1446 in stock?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service at 815-895-9101 regarding inventory/stock.
(0) (0)
Question
Chuck Sharin Chuck’s Automotive –
May I assume that MRO aerosol high solids enamel is SEYMOURS most durable highest quality paint versus Acrylic LAcquer PBE……Asking that Seymour considerr adding a SEMI Gloss Black MRO
(0) (0)
Answer
Seymour Paint –
We truly appreciate your feedback. We are not expanding the MRO line at this time, but if you are interested in private labeling a Semi-Gloss Black MRO please reach out to our sales Department for more information. Sales@seymourpaint.com
(0) (0)
Question
Bruce –
We have a 21 rubicon that is hydro blue can you match that color?
(0) (0)
Answer
Seymour Paint –
Our 620-1426 would be a close match but not exactly the same. Please contact our technical team at 815-895-9101 for additional questions.
(0) (0)
Question
Miguel –
Can I use seymour 620 -1432 spray paint on fiberglass?
(0) (0)
Answer
Seymour Paint –
Yes, you can apply 620-1432 over PRIMED fiberglass. I’d recommend our Spruce primers.
(0) (0)
Question
James manning –
Can I use your MRO to paint over a brass light fixture ? If so what prep would be required?
(0) (0)
Answer
Seymour Paint –
Yes, I would scuff the brass with a scouring pad or 400 grit sandpaper to help the paint adhere properly. A primer over the scuffed brass would also help.
(0) (0)
Question
Tammy –
Will this paint adhere to plastic and rubber?
(0) (0)
Answer
Seymour Paint –
It will not adhere to rubber as it’s too flexible. As for plastic, it will adhere to only the hard types….and ideally the plastic is sanded and primed first.
(0) (0)
Question
Karla –
Which color is a closer fit to Mojave jeep. Omaha or JL orange?
(0) (0)
Answer
Seymour Paint –
Omaha orange would be the best match.
(0) (0)
Question
Benjamin –
Will this work as a rust inhibitor as well for existing areas where its started to show surface rust? Or jyst a preventor?
(0) (0)
Answer
Seymour Paint –
No, anywhere that is rusting should be sanded down, primed with our rust converting primer (#16-45), and then top coated with the MRO.
(0) (0)
Question
Martin –
Can i use it on plastic, no primer?
(0) (0)
Answer
Seymour Paint –
Product will adhere to only hard type plastic and ideally sanded and primed first.
(0) (0)
Question
Jim Pearson –
Do you have 620-1443 in stock?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service team for item availability 815-895-9101.
(0) (0)
Question
Daniel –
How is the lightfastness of this paint? Does it have any UV inhibitors?
(0) (0)
Answer
Seymour Paint –
This product doesn’t have any UV inhibitors, but you could clear it with our 16-121 which does.
(0) (0)
Question
DAVE –
DO YOU SELL THESE BUY THE CASE OR JUST BY INDIVIDUAL CAN?
(0) (0)
Answer
Seymour Paint –
One case of our MRO products would be 6 cans. If you would like a distributor, please contact our sales department for more details at sales@seymourpaint.com.
(0) (0)
Question
Brian Zappala –
will this paint work long term as a boundary marking paint for trees
(0) (0)
Answer
Seymour Paint –
Yes, so long as it’s applied to a clean/dry/bare/hard surface.
(0) (0)
Question
Josh Padilla –
Can this product impact a cathodic protection system?
(0) (0)
Answer
Seymour Paint –
Yes, it would. Further, this product is not intended for use below the water line or on galvanized metal.
(0) (0)
Question
Lane Truett –
Is this paint a gloss finish? Industrial. MRO
(0) (0)
Answer
Seymour Paint –
620-1433 has a flat finish.
(0) (0)
Question
Brad –
can it be used in very wet areas?
(0) (0)
Answer
Seymour Paint –
Yes. It just can’t withstand continuous immersion in water.
(0) (0)
Question
Tim Lott –
Could this paint be used to paint laundry drop in sink?
(0) (0)
Answer
Seymour Paint –
No, the aluminum coating would rub off in time. I would recommend our 16-132 dull aluminum followed by our EN-70 clear—it’s meant for car engines but would work well here.
(0) (0)
Question
Steve Stanley –
Is this a gloss paint? Is it available in flat or satin? I’m looking for a gray enamel with a sheen similar to the Seymour Cast Blast.
(0) (0)
Answer
Seymour Paint –
It is high gloss. You could try the charcoal color in our roof paint line (#16-1703). It has a flat finish.
(0) (0)
Question
Chris Olson –
Is this product good for high temperature?
(0) (0)
Answer
Seymour Paint –
It has a continuous heat resistance of 300F.
(0) (0)
Question
chris osvalds –
are replacement nozzels available for the MRO spray paints?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service regarding B-13 nozzles.
(0) (0)
Question
CHARLES FURNARI –
Are your paints work with rust-oleum enamel?
(0) (0)
Answer
Seymour Paint –
Yes. Assuming the Rustoleum paint is fully cured, you can topcoat with the MRO and not have to worry about an adverse reaction.
(0) (0)
Question
Pat Oates –
What High Solids Paint matches closely to Kubota Orange?
(0) (0)
Answer
Seymour Paint –
Because it’s more of a reddish orange, our EN-48 or 620-1432 would be a good match.
(0) (0)
Question
Keith –
Can you paint plastic items
(0) (0)
Answer
Seymour Paint –
Yes, but only hard plastic objects….and only if they’re primed first. I would also advise to lightly sand the plastic to improve the adhesion of the primer.
(0) (0)
Question
David Barnette –
I am trying to find a color that Duke energy has on the pad mount green and it is a seymour product. can you help me ?
(0) (0)
Answer
Seymour Paint –
Unfortunately, we do not carry however we can custom match. Please contact sales@seymourpaint.com for order minimums and pricing.
(0) (0)
Question
Pat Oates –
Which orange color matches Kubota
(0) (0)
Answer
Seymour Paint –
We don’t have a color called Kubota orange, but 98-48 chevy orange is very close.
(0) (0)
Question
Holly Ramirez –
Can 620-1433 be used repaint inside the firebox?
(0) (0)
Answer
Seymour Paint –
It has a heat resistance of 300F continuously. If you don’t feel that it would withstand that temperature, you could opt for #16-1203 black which goes up to 1200F.
(0) (0)
Question
Ralph –
Do you supply Wurth with your high solids paint?
(0) (0)
Answer
Seymour Paint –
All of our customer information is confidential.
(0) (0)
Question
Ralph –
Do you have a walk-in Canadian distributor?
(0) (0)
Answer
Seymour Paint –
Hi there, please contact our sales team regarding distributors and other information at sales@seymourpaint.com.
(0) (0)