620-1452 Seymour MRO Industrial High-Solids Spray Paint, Safety Green (16 oz)
Product Line: MRO SKU: 620-1452DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$16.00
Seymour's MRO aerosols are high-solids, industrial-grade line of coatings specifically designed for Maintenance, Repair & Operations. This High-Solids formula provides long-lasting durability, does not run or sag and long-lasting corrosion protection in the toughest environments.
- Extremely Durable, Industrial-Grade High-Solids spray paint, for all your projects when conventional spray paint just wont cut it
- Won't run or sag and resists oil, gas, heat, abrasion and sunlight
- High-Solids formulation for twice the coverage of conventional spray paints
- Dries to touch in 30 min. Hard Cure 2-3 days.
- Up to 18 sq ft coverage per can
UPC: | 043281006880 |
Part #: | 0006201452 |
Container Size: | 20 OZ |
Net Fill Wt. OZ: | 16 |
Net Fill Wt. G: | 454 |
Prop 65 (cancer): | yes |
Prop 65 (repro): | yes |
Safety Data Sheet: | View Safety Data Sheet |
Product Information Sheet: | View Product Information Sheet |
Question
Van Andrew –
When will the 620-1449 dk green be available?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service department for lead times. Phone #815-895-9101 Thank you!
(0) (0)
Question
Kyle ZInger –
Where can I get access to the Safety Data Sheets for the majority of the MRO Industrial High-Solids Spray Paint product line?
(0) (0)
Answer
Seymour Paint –
You will find the safety data sheets under product specs of item or click on TDS/SDS tab on the right hand corner of our website.
(1) (0)
Question
Keith Paulson –
Do you have MRO SKU: 620-1417 in stock?
(0) (0)
Answer
Seymour Paint –
Currently, item is out of stock. Please contact our customer service regarding lead times.
(0) (0)
Question
Larry –
Do you plan on doing a satin black finish?
(0) (0)
Answer
Seymour Paint –
Not at this moment, we have product 98-24 in our Spruce line which has a satin black finish.
(0) (0)
Question
chaz –
620-1446 Seymour MRO Industrial High-Solids Spray Paint, Ryder Yellow (16 oz) in stock?
(0) (0)
Question
chaz –
620-1446 in stock?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service at 815-895-9101 regarding inventory/stock.
(0) (0)
Question
Chuck Sharin Chuck’s Automotive –
May I assume that MRO aerosol high solids enamel is SEYMOURS most durable highest quality paint versus Acrylic LAcquer PBE……Asking that Seymour considerr adding a SEMI Gloss Black MRO
(0) (0)
Answer
Seymour Paint –
We truly appreciate your feedback. We are not expanding the MRO line at this time, but if you are interested in private labeling a Semi-Gloss Black MRO please reach out to our sales Department for more information. Sales@seymourpaint.com
(0) (0)
Question
Bruce –
We have a 21 rubicon that is hydro blue can you match that color?
(0) (0)
Answer
Seymour Paint –
Our 620-1426 would be a close match but not exactly the same. Please contact our technical team at 815-895-9101 for additional questions.
(0) (0)
Question
Miguel –
Can I use seymour 620 -1432 spray paint on fiberglass?
(0) (0)
Answer
Seymour Paint –
Yes, you can apply 620-1432 over PRIMED fiberglass. Iâd recommend our Spruce primers.
(0) (0)
Question
James manning –
Can I use your MRO to paint over a brass light fixture ? If so what prep would be required?
(0) (0)
Answer
Seymour Paint –
Yes, I would scuff the brass with a scouring pad or 400 grit sandpaper to help the paint adhere properly. A primer over the scuffed brass would also help.
(0) (0)
Question
Tammy –
Will this paint adhere to plastic and rubber?
(0) (0)
Answer
Seymour Paint –
It will not adhere to rubber as itâs too flexible. As for plastic, it will adhere to only the hard typesâ¦.and ideally the plastic is sanded and primed first.
(0) (0)
Question
Karla –
Which color is a closer fit to Mojave jeep. Omaha or JL orange?
(0) (0)
Answer
Seymour Paint –
Omaha orange would be the best match.
(0) (0)
Question
Martin –
Can i use it on plastic, no primer?
(0) (0)
Answer
Seymour Paint –
Product will adhere to only hard type plastic and ideally sanded and primed first.
(0) (0)
Question
Jim Pearson –
Do you have 620-1443 in stock?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service team for item availability 815-895-9101.
(0) (0)
Question
Daniel –
How is the lightfastness of this paint? Does it have any UV inhibitors?
(0) (0)
Answer
Seymour Paint –
This product doesnât have any UV inhibitors, but you could clear it with our 16-121 which does.
(0) (0)
Question
Josh Padilla –
Can this product impact a cathodic protection system?
(0) (0)
Answer
Seymour Paint –
Yes, it would. Further, this product is not intended for use below the water line or on galvanized metal.
(0) (0)
Question
Lane Truett –
Is this paint a gloss finish? Industrial. MRO
(0) (0)
Answer
Seymour Paint –
620-1433 has a flat finish.
(0) (0)
Question
Brad –
can it be used in very wet areas?
(0) (0)
Answer
Seymour Paint –
Yes. It just canât withstand continuous immersion in water.
(0) (0)
Question
Tim Lott –
Could this paint be used to paint laundry drop in sink?
(0) (0)
Answer
Seymour Paint –
No, the aluminum coating would rub off in time. I would recommend our 16-132 dull aluminum followed by our EN-70 clear—itâs meant for car engines but would work well here.
(0) (0)
Question
Steve Stanley –
Is this a gloss paint? Is it available in flat or satin? I’m looking for a gray enamel with a sheen similar to the Seymour Cast Blast.
(0) (0)
Answer
Seymour Paint –
It is high gloss. You could try the charcoal color in our roof paint line (#16-1703). It has a flat finish.
(0) (0)
Question
chris osvalds –
are replacement nozzels available for the MRO spray paints?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service regarding B-13 nozzles.
(0) (0)
Question
CHARLES FURNARI –
Are your paints work with rust-oleum enamel?
(0) (0)
Answer
Seymour Paint –
Yes. Assuming the Rustoleum paint is fully cured, you can topcoat with the MRO and not have to worry about an adverse reaction.
(0) (0)
Question
Pat Oates –
What High Solids Paint matches closely to Kubota Orange?
(0) (0)
Answer
Seymour Paint –
Because itâs more of a reddish orange, our EN-48 or 620-1432 would be a good match.
(0) (0)
Question
David Barnette –
I am trying to find a color that Duke energy has on the pad mount green and it is a seymour product. can you help me ?
(0) (0)
Answer
Seymour Paint –
Unfortunately, we do not carry however we can custom match. Please contact sales@seymourpaint.com for order minimums and pricing.
(0) (0)
Question
Pat Oates –
Which orange color matches Kubota
(0) (0)
Answer
Seymour Paint –
We donât have a color called Kubota orange, but 98-48 chevy orange is very close.
(0) (0)
Question
Holly Ramirez –
Can 620-1433 be used repaint inside the firebox?
(0) (0)
Answer
Seymour Paint –
It has a heat resistance of 300F continuously. If you donât feel that it would withstand that temperature, you could opt for #16-1203 black which goes up to 1200F.
(0) (0)
Question
Brian Coulston –
What are the storage requirements for MRO Product 6201413, white? Does this product require storage in a fire cabinet via OSHA or Fire Regulations?
(0) (0)
Answer
Seymour Paint –
It depends on how many cans. The NFPA publishes a guidebook that explains the requirements, please contact your local fire department for a recommendation. Aerosol cans should not be warehoused in subfreezing temperatures or exposed to temperatures above 120F.
(0) (0)
Question
Daniel Hicswa –
Hi are any of these stainless-steel paints available in Qt?
(0) (0)
Answer
Seymour Paint –
We have a 5-gallon pail part number 0-554. Please contact our sales team for more information at sales@seymourpaint.com.
(0) (0)
Question
Donovan Henry –
about to buy gloss white to do my wheels. I’m reading that you dont recommend a clear coat. I was going to use a 2k. Is that still not advisable or needed?
(0) (0)
Answer
Seymour Paint –
This has a high gloss finish and would work well by itself on the wheels. If you do decide to clear, give the white upwards of a week to fully cure first.
(0) (0)
Question
Donovan Henry –
Doing my wheels with this. Do I need a clearcoat? I was thinking of using a 2k
(0) (0)
Answer
Seymour Paint –
This has a high gloss finish and would work well by itself on the wheels. If you do decide to clear, give the white upwards of a week to fully cure first.
(0) (0)
Question
Milton –
This paint (SKU: 620-1411) is described and the can is labeled as enamel. I just bought a can on AMAZON but the can says its Lacquer (see photo). So what is it? I need paint that is chemical resistant and lacquer would not work.
(0) (0)
Answer
Seymour Paint –
It is a lacquer. It is the only color in MRO that is not enamel because it is a leafing aluminum. The only metallic we offer in high gloss enamel is EN-71 dull aluminum.
(0) (0)
Question
Fastenal Company –
is this sunbelt green 0006201437
(0) (0)
Answer
Seymour Paint –
Yes. We just canât call it that because of copyright concerns.
(0) (0)
Question
Rodeo –
Where can I find a list of carriers so that I can shop in person?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service team for information regarding distributors/stores.
(0) (0)
Question
Beth Holley –
What is the best acryllic latex spray paint to use on galvanized metal?
(0) (0)
Answer
Seymour Paint –
It depends on the project. What are you painting exactly?
(0) (0)
Question
Dustie –
Can u paint a truck with this stuff ?
(0) (0)
Answer
Seymour Paint –
Yes! MRO was specifically designed for metal and wood applications.
(0) (0)
Question
craig werum –
Can you paint plastic with MRO paint?
(0) (0)
Answer
Seymour Paint –
Yes, but only the hard type plastics that have been scuffed and primed first.
(0) (0)
Question
Lisa Taylor –
can you use this on furniture cloth?
(0) (0)
Answer
Seymour Paint –
No. This paint is not intended for fabric.
(0) (0)
Question
Gary Kolenich –
I’m painting Cammo graphics on my RV and it is outside. Would I need to tarp it?
(0) (0)
Answer
Seymour Paint –
No need to cover with a tarp because of our product. It has excellent durability in sunlight and weather.
(0) (0)
Question
Michael –
Can this be used on plastic ( hubcaps)
(0) (0)
Answer
Seymour Paint –
Yes, but only hard type plastics that have been scuffed up and primed.
(0) (0)
Question
Tom L. –
Dose this paint come in a matte or satin finish?
(0) (0)
Answer
Seymour Paint –
Sorry, just high gloss.
(0) (0)
Question
David –
Is there a protective clear that works with the Industrial MRO line?
(0) (0)
Answer
Seymour Paint –
We donât recommend it, but the EN-70 clear in the HiTech line is a compatible formula.
(0) (0)
Question
Tom –
What does SB Green look like and does SB stand for anything?
(0) (0)
Answer
Seymour Paint –
SB stand for SunBelt green, like the forklift company.
(0) (0)
Question
Jawad –
Hello im looking to use 620-1441 and 620-1411 on a project in which i will be painting an ABS plastic and Steel surface. I plan to prep the surface, prime, use the Seymour high solids spray colors mentioned earlier and then finish up with a spraymax 2K clear coat. Wanted to ask how long i should wait between the multiple layers of the seymour base coat and how long is should wait to apply the spraymax 2k clear.
If the spraymax 2k is not compatible or recommended, would really appreciate an alternative that Seymour offers or a different brand that would be a better fit. Thank you in advance.
(0) (0)
Answer
Seymour Paint –
The process you are choosing is correct. When applying the MRO enamels, you can recoat within 15 minutes but apply your coats in succession and then leave it to cure. Curing time depends on how thick you apply the paint as well as your drying conditionsâit could take anywhere from 3-7 days. Itâs ok to clear over the MRO, but itâs absolutely essential that the base coat be fully cured first.
(0) (0)
Question
Lane Truett –
Is this a gloss finish
(0) (0)
Answer
Seymour Paint –
Yes, it is high gloss.
(0) (0)
Question
Mark Metzger –
Hi, do you have Edge Red for high heat (300 degrees) for engine shroud. Prefer spray can. It is the color used on C8 Corvette engine sections. Thanks!
(0) (0)
Answer
Seymour Paint –
We donât have edge red, but one of our reds in the MRO or HiTech brands might match. Both brands would have 300F heat resistance.
(0) (0)
Question
Robert Griffin –
Do you sell this paint in a pint or a quart?
(0) (0)
Answer
Seymour Paint –
We only offer in aerosol or gallon part number 1-1423, however depending on your location product may not be available. Please contact our sales team for more information sales@seymourpaint.com or 815-895-9101.
(0) (0)
Question
Robert Griffin –
Do you sell this in half pint or pint?
(0) (0)
Answer
Seymour Paint –
We carry this paint in gallons only (#1-1423).
(0) (0)
Question
Mario nonnenmacher –
Does this paint require a clear coat?
(0) (0)
Answer
Seymour Paint –
No, it does quite well by itself.
(0) (0)
Question
Ken –
Would this be considered a matte orange paint
(0) (0)
Answer
Seymour Paint –
No, itâs high gloss.
(0) (0)
Question
William K Berg –
Is 620-1417 ANSI 49 a water or oil based paint? Can it be used on metal?
(0) (0)
Answer
Seymour Paint –
It is oil based and is excellent for metal.
(0) (0)
Question
julie –
can this be used in a fireplace and good for high heat?
(0) (0)
Answer
Seymour Paint –
It has a 300F continuous heat resistance. Would say probably not the right choice. Please contact our technical support for further assistance 815-895-9101.
(0) (0)
Question
Nathan Welle –
is the MRO oil based acrylic or other
(0) (0)
Answer
Seymour Paint –
620-1453 Tan is an enamel. No acrylic.
(0) (0)