16-112 Seymour Hi-Tech Enamel Spray Paint, Dove Gray (12 oz.)
Product Line: Hi-Tech SKU: 16-112DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$12.50
A fast drying general purpose enamel spray paint that provides a smooth, even coat with minimal drip and long-lasting color. Highly durable with great corrosion resistance to heat, rust, oil, gas & chemicals.
- Delivers a consistent spray pattern that provides an even coat and helps eliminate drips
- Works on Metal, Fiberglass & Wood
- Heat resistant up to 250F and is oil, chemical and gas resistant
- Dries to Touch in 5 min. 30 min to Tack-Free.
- Up to 15 sq ft of coverage per can
UPC: | 043281000130 |
Part #: | 0000160112 |
Container Size: | 16 OZ |
Net Fill Wt. OZ: | 12 |
Net Fill Wt. G: | 340 |
Prop 65 (cancer): | Yes |
Prop 65 (repro): | Yes |
Safety Data Sheet: | View Safety Data Sheet |
Product Information Sheet: | View Product Information Sheet |
Question
Patrick daly –
Can this paint be clearcoated
(0) (0)
Answer
Seymour Paint –
Yes, but only after itâs fully cured. The EN-70 clear is our most compatible clear. Please click on TDS link below to see dry/curing information.
https://cdn.amplifi.pattern.com/4cafa39f-d065-491c-92b6-dc490f7585fe
(0) (0)
Question
Matt Beilstein –
Will this paint standup to small amounts of gasoline exposure?
(0) (0)
Answer
Seymour Paint –
Yes, it will.
(0) (0)
Question
ERIC WENINGER –
Is this paint gasoline proof or gasoline resistant?
(0) (0)
Answer
Seymour Paint –
It does have limited gasoline resistance. It could handle occasional splashes, but not immersion for any amount of time.
(0) (0)
Question
Glenn lindsey –
Can I paint my cabinets with this?
(0) (0)
Answer
Seymour Paint –
Yes, preparation is key. If the cabinets are glossy, please sand and apply an oil-based primer first (our 16-831 would work well).
(0) (0)
Question
Tim Toland (verified owner) –
How to apply?
(0) (0)
Answer
Seymour Paint –
Make sure to have a clean, bare surface or a primed surface and then apply 2 coats within 15 minutes of each other and then leave it to cure for a couple days. Excessive coats or high humidity will extend the cure time.
(0) (0)
Question
Allen –
Would you recommend this paint for new and old picture frames ?
(0) (0)
Answer
Seymour Paint –
If youâre intending to spray the frames black, I would recommend the PBE acrylic trim paints as they dry much faster and have a deeper black color. PBE technical Data Sheet link below.
https://cdn.amplifi.pattern.com/e5fcee75-a959-4fc0-944e-644631aaad69
(0) (0)
Question
Jeremy –
Would this be suitable for an intake manifold on a diesel?… don’t have emerald green in your engine enamel section
(0) (0)
Answer
Seymour Paint –
Yes, it has 300F continuous heat resistance while also being resistant to gasoline and oil.
(0) (0)
Question
Xavier –
can be used for ford ranger engine
(0) (0)
Answer
Seymour Paint –
Yes, it has the right heat and chemical resistance for that application.
(0) (0)
Question
Chad B –
Dose this paint need a clear coat?
(0) (0)
Answer
Seymour Paint –
No, does not need to be clear coated.
(0) (0)
Question
Rick –
Are there any retail outlets that sell this product? Shipping is almost as expensive as the paint itself.
(0) (0)
Answer
Seymour Paint –
Please contact our sales team for further assistance via phone 815-895-9101 or email sales@seymourpaint.com
(0) (0)
Question
Ed –
Is this paint as white as printer paper. It must be extremely white
(0) (0)
Answer
Seymour Paint –
Wouldnât say it is that white, but it is close.
(0) (0)
Question
Andy –
Would this be the right product to paint corner gaurds on a jeep. How uv resistant is the product?
(0) (0)
Answer
Seymour Paint –
It has good UV resistance and a high gloss finish. Heat resistant is 300F.
(0) (0)
Question
Jon Quintana –
I need mitsubishi p18 pure red
(0) (0)
Answer
Seymour Paint –
Sorry, we donât make that exact shade of red.
(0) (0)
Question
George Fleischer –
Is this dove gray available in semi gloss?
(0) (0)
Answer
Seymour Paint –
Unfortunately, we only have high gloss.
(0) (0)
Question
stepjhen –
can this be used inside a microwave?
(0) (0)
Answer
Seymour Paint –
16-112 should not be used in the microwave.
(0) (0)
Question
TY RAWLS –
Is this Hotsey true red?
(0) (0)
Answer
Seymour Paint –
Itâs not a dead match but itâs close.
(0) (0)
Question
Greg Tobias –
which has the most gloss,
semi gloss or satin black ?
(0) (0)
Answer
Seymour Paint –
Semi-gloss. On a 0-100 scale it would be 50-60. Satin would be 25-35.
(0) (0)
Question
keith edwards –
do you have an exact color machine for the green used on sunbelt rentals machines?
(0) (0)
Answer
Seymour Paint –
Yes, our #620-1437 is the sunbelt green color.
(0) (0)
Question
randy –
is this the standard sunbelt green color?
(0) (0)
Answer
Seymour Paint –
No, but our 620-1437 matches sunbelt green.
(0) (0)
Question
Daryn –
Can this be used on plastic engine bay components? And if so do you need a primer on the plastics before applying?
(0) (0)
Answer
Seymour Paint –
Yes, but only on hard plastics and only if they are primed. The PBE sandable primers will work on hard plastics. Please scuff up the plastic if it is smooth and/or shiny.
(0) (0)
Question
Daniel Sutton –
Does this paint need a UV protectant topcoat?
(0) (0)
Answer
Seymour Paint –
No, it does well by itself.
(0) (0)
Question
James Stammer –
How well will this work on aluminum wheels?
(0) (0)
Answer
Seymour Paint –
Great, but definitely scuff the wheels up first to achieve good adhesion.
(0) (0)
Question
Lauren Vandery –
Best paint for a wood outdoor park bench?
(0) (0)
Answer
Seymour Paint –
Yes, this would be an excellent choice.
(0) (0)
Question
Gary –
Could you spray over ceramic tile with it?
(0) (0)
Answer
Seymour Paint –
I would scuff the tile to ensure proper adhesion.
(0) (0)
Question
Mike –
Will this work well with interior car parts like a plastic dash
(0) (0)
Answer
Seymour Paint –
Yes, but only if the plastic is the hard type. Not recommended for soft flexible plastics.
(0) (0)
Question
Paul –
I’m painting a iron fence that has been primed, looking for a high Gloss finish will this provide such a finish
(0) (0)
Answer
Seymour Paint –
Yes, it is high gloss.
(0) (0)
Question
Rome Cagnina –
Well, this paint work on metal outdoor furniture and prevent mold and dirt buildup
(0) (0)
Answer
Seymour Paint –
Yes, this will hold up well. That said, it does not have a mold inhibitor in the formulation.
(0) (0)
Question
TD Campbell –
I just got 4 cans of Seymour 16-139 Hi-Tech Enamels Spray Paint, Semi-Gloss to repaint my targets should I use a primer first? If so what kind? I was thing self etching primer.
(0) (0)
Answer
Seymour Paint –
Yes, the self-etch primer would be a good choice under the 16-139.
(0) (0)
Question
Ron –
Does the 16-133 flat black have any UV protection?
(0) (0)
Answer
Seymour Paint –
Yes, it holds up well outdoors.
(0) (0)
Question
Mike –
I need 1970 Buick skylark paint code 58
(0) (0)
Answer
Seymour Paint –
Sorry, we donât make that color.
(0) (0)
Question
marie eve legault (verified owner) –
hi, high tech spray paint : heat resistance 250 or 300? data spec sheet is 300 and 250 on picture product. thanks
(0) (0)
Answer
Seymour Paint –
16-140 has 300F continuous heat resistance.
(0) (0)
Question
mary –
do I have to put a primer if I want to paint NEW electric baseboard heater?
(0) (0)
Answer
Seymour Paint –
No, just apply a light first coat and then come back a few minutes later with your successive coat(s).
(0) (0)
Question
Babak –
Does it stick on glass?
(0) (0)
Answer
Seymour Paint –
Would scuff the glass first, but yes.
(0) (0)
Question
Kim –
Is this rough to the touch
(0) (0)
Answer
Seymour Paint –
No, it is a smooth high gloss finish.
(0) (0)
Question
Mary –
Can this paint be used on a porcelain tub?
(0) (0)
Answer
Seymour Paint –
No. This type of paint is not intended for immersion in water.
(0) (0)
Question
Jacky Smith –
Will this paint stick to auto aluminum valve covers ?
(0) (0)
Answer
Seymour Paint –
Iâd prime the covers with the 20-1681 gray self-etch primer, but yes.
(0) (0)
Question
Ed Ochoa –
Would this be considered a high heat paint? Could it be used on engines?
(0) (0)
Answer
Seymour Paint –
It is heat resistant to 300F continuously. It can be used on engine blocks.
(0) (0)
Question
Donna mitchell –
Can this be used on a gas stove top
(0) (0)
Answer
Seymour Paint –
It is heat resistant to 300F. Not sure if that is high enoughâthere might be some really high heat being reflected off the pots and pans.
(0) (0)