16-831 Seymour Hi-Tech Primer, Light Gray (12 oz)
Product Line: Hi-Tech SKU: 16-831DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$13.00
A fast drying spray primer that provides maximum rust protection and adhesion for a finishing top coat. Can be used with lacquer, enamel, and acrylic paints. Provides excellent resistance to heat and corrosion. VOC compliant. For best results, sand lightly with fine sandpaper or steel wool prior to applying finish coat.
- Interior/exterior primer that works on metal, wood & fiberglass
- Highly durable and provides maximum protection against rust
- Dries to Touch in 10 min. 30 min to Topcoat
- Up to 15 sq ft of coverage per can
UPC: | 043281001052 |
Part #: | 0000160831 |
Container Size: | 16 OZ |
Net Fill Wt. OZ: | 12 |
Net Fill Wt. G: | 340 |
Prop 65 (cancer): | yes |
Prop 65 (repro): | yes |
Safety Data Sheet: | View Safety Data Sheet |
Product Information Sheet: | View Product Information Sheet |
Question
JB –
Can this primer be used for engines since it is labeled as heat-resistant?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it has a heat resistance of 250F continuous.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brandon –
Will there be a lifting issue if I spray PBE primer over hi-tech primer? Hi- tech sprayed on car by mistake.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No issues if you give the HiTech primer a few hours to set up first. If you have additional questions, please contact our technical support 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Lewis –
Is this 16 -‘807 a epoxy primer???
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
John Braden –
Is this primer lead free
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
All our paints are lead free.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Kenneth J Andrus –
Will it work on plastic?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Hard plastics that have been sanded, yes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mick Ross –
Is this considered a “sandable” primer?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
âSandableâ usually implies you can sand on it in 30 minutes or less (for that, use #20-1671). But yes, itâs sandable in about 8 hours.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal