800-435-4482
20-1677 Seymour PBE Professional Trim Spray Paint, Gloss Black (15 oz.)
Product Line: PBE SKU: 20-1677DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$14.99
Free shipping on orders over $50*
or Choose Where to Buy:
Trim paint is formulated using an acrylic resin that resists fading from ultraviolet light and degradation from chemicals. Spray like a professional without the equipment, prep time, cleanup, or waste. Several light coats produce a better finish than one heavy coat. A heavy coat applied over an enamel may cause lifting. Bare surfaces or rusted metal surfaces should first be primed with the PBE sandable primers. Large spray head gives a professional looking application. Heat resistant up to 250˚F. Comes in a can, sprays like a gun.
- Ideal for body panels, engine parts, metal structures, aviation parts, heavy machinery and more.
- Dry times: (5 minutes to touch), (15 minutes to topcoat)
- Resists fading from ultraviolet light & degradation from chemicals
- Comes in a can, sprays like a gun
- Heat resistant up to 250˚F
| UPC: | 043281002257 |
| Part #: | 0000201677 |
| Container Size: | 20 OZ |
| Net Fill Wt. OZ: | 15 |
| Net Fill Wt. G: | 425 |
| Prop 65 (cancer): | Yes |
| Prop 65 (repro): | Yes |
| Safety Data Sheet: | View Safety Data Sheet  |
| Product Information Sheet: | View Product Information Sheet |
Question
Frank Tetro Jr –
I used this product on my 86 corvettes engine bay and firewall and it dried tacky. So much dust and pollen is stuck to it. Is there anything I can do to remedy this. What would make the finish stay sticky? By the way, the product laid out beautifully. It looked so beautiful. At first…
(0) (0)
Answer
Seymour Paint –
Seymour’s 20-1679 is an acrylic lacquer and should have dried without any tackiness unless the engine bay was not properly cleaned first.
(0) (0)
Question
Rob C –
How to prepare trim ?
(0) (0)
Answer
Seymour Paint –
Just a wipe down with a fast-evaporating solvent such as nail polish remover to remove any grease or contamination.
(0) (0)
Question
Jeannie Meagher –
I’m going to use it on wrought iron patio furniture. Should I prepare the furniture first? It’s no gooped up with paint, but has a little rust. For 48″ table, 4 barrel chairs & 2 chaise lounges, how many cans do I need, please? Thx!
(0) (0)
Answer
Seymour Paint –
Would hit the rusty spots with our rust converting primer (#16-45) first and wire brush any loose/peeling paint to ensure good adhesion. 5 cans of the PBE should be enough for that furniture.
(0) (0)
Question
Ryan Knighton –
Do I need to use a primer ?
(0) (0)
Answer
Seymour Paint –
Bare surfaces or rusted metal surfaces should first be primed with the PBE sandable primers.
(0) (0)
Question
Michael Ruel (verified owner) –
How long is full cure?
(0) (0)
Answer
Seymour Paint –
Dry Time:
To touch 5 minutes
To Topcoat 15 minutes
**Curing/Recoat time is extended with multiple coats and excessively thick coats**
(0) (0)