800-435-4482
EN-48 Seymour Hi-Tech Engine Enamel Spray Paint, Chevy Orange (12 oz)
Product Line: Hi-Tech SKU: EN-48DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$11.99
Free shipping on orders over $50*
or Choose Where to Buy:
Hi-Tech Engine Enamel is a heat resistant spray paint that provides a smooth, even coat with minimal drip and long-lasting color. Protects engines, transmissions, and other O.E.M. Equipment. Hi-Tech Engine Enamels are highly durable, dry fast and resistant to gasoline, oil, and heat.
- Restores original factory color to engines, transmissions, and other OEM equipment
- Produces a durability coating under various stress conditions
- Heat resistant up to 300F and is chemical and gas resistant
- Dries to touch in 5 min. Tack-free in 30 min
- Up to 15 sq ft of coverage per can
| UPC: | 043281003780 |
| Part #: | EN00480000 |
| Container Size: | 16 OZ |
| Net Fill Wt. OZ: | 12 |
| Net Fill Wt. G: | 340 |
| Prop 65 (cancer): | yes |
| Prop 65 (repro): | yes |
| Safety Data Sheet: | View Safety Data Sheet  |
| Product Information Sheet: | View Product Information Sheet |
Question
R&RTestorations –
Do you have Chevy dark gray for 30s to 50s Chevrolet cars & trucks?
(0) (0)
Answer
Seymour Paint –
We stock Chevy Blue and Chevy Orange, but no dark gray.
(0) (0)
Question
Mary Ross –
Would Seymour metalic spray be suitable for a hot water radiator in a heritage home. Originally (1926) it would have been a gold/brass colour. Many coats of paint over the years.
(0) (0)
Answer
Seymour Paint –
Yes, Seymour’s metallic gold is high resistant up to 250°F. Most home radiators do not exceed 215°F.
(0) (0)
Question
antonio Valdambrini –
Does this product need a primer to be given first? thank you
(0) (0)
Answer
Seymour Paint –
You may apply our engine enamels with and without primer. If you choose not to use a primer, it’s important that the surface be clean bare metal. We recommend one very light coat followed by a second (and maybe a third) regular coat at 10 minute intervals. Give it 3-7 days to fully cure before returning to service.
(0) (0)
Question
Allan Phan –
How long before you have en-41 again?
(0) (0)
Answer
Seymour Paint –
Please contact our customer service at 815-895-9101 regarding lead times.
(0) (0)
Question
Bill –
Hello, I am looking for EN-66 AMC metallic blue. Would you be able to tell me when you will be getting stock in. Thanks
(0) (0)
Answer
Seymour Paint –
Hello, please contact our customer service regarding lead time on products.
(0) (0)
Question
Johnny –
Can I use duplicolor clear engine enamel over en50 universal gold.
(0) (0)
Answer
Seymour Paint –
Yes, you can.
(0) (0)
Question
Kelly –
Is this paint safe to use inside fuel tanks
(0) (0)
Answer
Seymour Paint –
While this product resists gasoline, it would not hold up to continuous immersion.
(0) (0)
Question
Gabriel Guzman –
Do you sell it for the Navistar DT 466
(0) (0)
Answer
Seymour Paint –
Sorry, we do make that specific color.
(0) (0)
Question
Oscar –
Do you have a paint that resembles CAD paint
(0) (0)
Answer
Seymour Paint –
This is NOT the cad gold, sorry.
(0) (0)
Question
Sven Christensen –
What is the difference between paint 98-48 or EN-48? How close are they to the orginal chevy orange and is it very glossy? Is either paint suitable for a 1963 Corvette engine. Thanks for your help.
(0) (0)
Answer
Seymour Paint –
Please reach out to our technical team they will be happy to assist 815-895-9101.
(0) (0)
Question
Anthony –
Do you have Oldsmobile gold engine paint for 74-77 engines?
(0) (0)
Answer
Seymour Paint –
You may try this product however it may not be an exact match. We are developing a new program to custom match colors, please check back in a few months.
(0) (0)
Question
Suzanne Oakley –
Can I use the paint on outer fireplace? Not in box but next to the box
(0) (0)
Answer
Seymour Paint –
It has a 250F continuous heat resistance. You will have to make that determination if the area gets to that temperature.
(0) (0)
Question
Dan –
Do you make Buick engine paint it’s red? If so do you have it in stock or have a vendor I can purchase it from?
(0) (0)
Answer
Seymour Paint –
Our paints were not matched to specific color codes or vehicle model years. Hi-Tech engine enamel colors have been in our line since the 1970s. If you have additional technical questions, please contact our technical support. Regarding item availability and vendor information please contact our customer service department.
(0) (0)
Question
jim –
do I need to put primer first
(0) (0)
Answer
Seymour Paint –
Yes, for any engine application with this specific color a primer is highly recommended.
(0) (0)
Question
Mason –
Any possible way to make a candy apple green color I’ll pay extra ?
(0) (0)
Answer
Seymour Paint –
Hi there, please contact our sales department regarding custom color options sales@seymourpaint.com.
(0) (0)
Question
David A –
Does your EN-71 Dull Aluminum paint match 50-60% gloss Argent Silver ?
(0) (0)
Answer
Seymour Paint –
It’s close but not exact. We used to offer argent silver; however, it’s discontinued.
(0) (0)
Question
dpn –
does this paint dry to a hard finish,is it tough
(0) (0)
Answer
Seymour Paint –
Yes, it’s gas/heat/oil resistant and has been used in engine compartments for decades.
(0) (0)
Question
Bob –
Do you have oldsmobile color engine paint
(0) (0)
Answer
Seymour Paint –
Sorry, we don’t have this color.
(0) (0)
Question
Daniel –
The color selection is excellent. Can this paint be applied to brake calipers, alternatively?
(0) (0)
Answer
Seymour Paint –
Yes, it has a 300f heat resistance so it would hold up well on calipers.
(0) (0)
Question
Bobby Ru –
Can this be used on aluminum wheels?
(0) (0)
Answer
Seymour Paint –
Yes, we would prime first with our self-etching primer, 20-1682. If the wheels are shiny you could improve adhesion by wet sanding with 400 grit sandpaper.
(0) (0)
Question
Travis –
Can a plastic intake be primed with one of your products and then painted with one of these colors? If so what primer
(0) (0)
Answer
Seymour Paint –
If it’s hard plastic, yes. I would use the 16-831 light gray primer.
(0) (0)
Question
Brad –
Can it be used on plastic?
(0) (0)
Answer
Seymour Paint –
Yes, but only very hard type plastics that have been primed.
(0) (0)
Question
Matt –
Can you use this on plastic valve covers
(0) (0)
Answer
Seymour Paint –
Yes, assuming the plastic is a very hard type. I’d scuff it and apply a primer first.
(0) (0)
Question
Michael –
Do you carry Ford Bronze in aerosol pray cans?
(0) (0)
Answer
Seymour Paint –
Unfortunately, we do not have this color.
(0) (0)
Question
Matt –
Can you paint plastic valve covers with this?
(0) (0)
Answer
Seymour Paint –
Yes, but I would recommend lightly scuffing with steel wool and applying a primer first.
(0) (0)
Question
Tony T –
Do you have 1993 mustang reef blue
(0) (0)
Answer
Seymour Paint –
Seymour does not have a blue to match 1993 Mustang Reef Blue.
(0) (0)
Question
allen –
can you supply this in Qt. size?
(0) (0)
Answer
Seymour Paint –
Unfortunately, we only offer this product in aerosol.
(0) (0)
Question
Brian Oswalt –
Can this be spayed directly over bare metal engine block?
(0) (0)
Answer
Seymour Paint –
Yes, this paint was designed specifically for engine blocks! Please make sure to clean the surface first!
(0) (0)
Question
Doug Anderson –
Do you offer Dutch Witch Orange Touch up spray paint?
(0) (0)
Answer
Seymour Paint –
We do not carry Ditch Witch Orange in the Seymour line. Please reach out to sales@seymourpaint.com for custom match pricing and availability.
(0) (0)
Question
Lloyd –
What primer do you suggest using with this enamel?
(0) (0)
Answer
Seymour Paint –
Product 16-831 gray primer is a good choice for engine bay parts.
(0) (0)
Question
bernard mcmahon –
What color is correct for an Austin Healy BJ8 engine? bernard
(0) (0)
Answer
Seymour Paint –
We don’t know, sorry. Based on what I’m seeing online, our alpine green has the right hue but is not metallic.
(0) (0)