800-435-4482
Hi-Tech Engine Enamel Spray Paint—Detroit Diesel Alpine Green (12 oz)
Detroit Diesel Alpine Green Automotive Engine Enamel Paint
Product Line: Hi-Tech SKU: EN-60$11.99
Seymour Hi-Tech Detroit Diesel Alpine Green Engine Enamel Spray Paint Product Details
We launched Seymour’s automotive division 60 years ago. Suffice it to say—we know what we’re doing when it comes to engine enamels and aerosol spray paint. Our Hi-Tech Detroit Diesel Alpine Green Engine Enamel Spray Paint is top-of-the-line and perfect for restoring your engine, transmission, and OEM parts to their original factory color.
One can of Hi-Tech covers 15 square feet of surface with a heat-resistant spray paint that dries fast to a color that lasts. Protect your car parts with a highly durable, gas-, oil-, and chemical-resistant spray that goes on smooth.
A little bit beauty, a little bit beast—with Hi-Tech Engine Enamels, you get the best of both. Looking to protect and restore? Look no further.
Restore Original Factory Color to Engines, Transmissions & More
A well-maintained car has an undeniable aesthetic—and that includes the engine, transmission, intake manifold, and more. When you use automotive engine enamel spray paint, you’re not just protecting your car—you’re restoring it to its original splendor.
Hi-Tech Detroit Diesel Alpine Green Enamel Paint goes on simple and smooth. The aerosol spray paint makes it easy, and the quality of Seymour Paint products ensures an even coat with minimal drip and vibrant, long-lasting color.
Quick-Drying
There’s no time to waste when you’re improving your vehicle. Seymour knows what it takes to safeguard automotive parts and how to do it fast and flawlessly. Our quick-drying formula dries to the touch in 5 minutes. That’s a heat-resistant, durable layer of protection in no time.
Your time is valuable. We get that. So, we make quality products that respect you and your time.
Highly Durable Engine Enamel Spray Paint That Protects!
Yes, appearance is important to us—but it’s not nearly as important as the caliber of our products. Hi-Tech Engine Enamel Spray Paint offers superior durability. Our premium engine enamels are tested under various stress conditions and found to be second to none! If you want to protect your vehicle while restoring and maintaining the original aesthetic, Hi-Tech is the only choice.
Resistant to Oil, Gas, Chemicals, Rust & Heat
Hi-Tech Detroit Diesel Alpine Green Enamel Spray Paint isn’t just tough—it’s engineered to withstand the toughest conditions. Resistant to oil, gasoline, and harsh chemicals, our automotive engine enamel spray paint protects surfaces from the damaging effects of spills, splashes, and mishaps.
Our formula is also rust-resistant—shielding your engine from corrosion—and heat-resistant up to 300°F. Using high-heat-resistant spray paint makes certain that your vehicle’s components can withstand high temperatures without peeling or cracking.
With Hi-Tech Engine Enamel, you’re getting the best. Easy to use. Quick-drying. Durable. Resilient. And all with the Seymour reputation of excellence? It’s a no-brainer.
Suggested Uses for Seymour’s Hi-Tech Engine Enamel Spray Paint
Seymour’s Detroit Diesel Alpine Green automotive engine enamel spray paint protects and enhances your vehicle’s components, maintaining their integrity and appearance over time. Use our heat-resistant spray on a variety of parts, including:
- Oil pans
- Transmissions
- Engine blocks
- Intake manifolds
- OEM parts
Made in the USA.
- Restores original factory color to engines, transmissions, and other OEM equipment
- Produces a durability coating under various stress conditions
- Heat resistant up to 300F and is chemical and gas resistant
- Dries to touch in 5 min. Tack-free in 30 min
- Up to 15 sq ft of coverage per can
| UPC: | 043281003834 |
| Part #: | EN00600000 |
| Container Size: | 16 OZ |
| Net Fill Wt. OZ: | 12 |
| Net Fill Wt. G: | 340 |
| Prop 65 (cancer): | yes |
| Prop 65 (repro): | yes |
| Safety Data Sheet: | View Safety Data Sheet  |
| Product Information Sheet: | View Product Information Sheet |
Share your thoughts!
Let us know what you think...
CUSTOMER QUESTIONS & ANSWERS
CUSTOMER REVIEWS
-
Superior paint
Using this for painting of industrial equipment and it dries fast, especially for a gloss, cures hard and leaves an absolutely beautiful finish.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
-
Excellent Engine Paint!
I have used MRO at work to coat pipe exposed to the sun. It seems to hold up. This engine paint goes on nicely. I used the MRO light gray primer, then top coated with the alpine green engine paint. It looks great!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
-
Manifold looks new
I painted my aluminum intake manifold and it looks new. This paint sprayed perfect, no runs, great coverage, and it looks awesome.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
R&RTestorations –
Do you have Chevy dark gray for 30s to 50s Chevrolet cars & trucks?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mary Ross –
Would Seymour metalic spray be suitable for a hot water radiator in a heritage home. Originally (1926) it would have been a gold/brass colour. Many coats of paint over the years.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, Seymour’s metallic gold is high resistant up to 250°F. Most home radiators do not exceed 215°F.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
antonio Valdambrini –
Does this product need a primer to be given first? thank you
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
You may apply our engine enamels with and without primer. If you choose not to use a primer, it’s important that the surface be clean bare metal. We recommend one very light coat followed by a second (and maybe a third) regular coat at 10 minute intervals. Give it 3-7 days to fully cure before returning to service.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Allan Phan –
How long before you have en-41 again?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our customer service at 815-895-9101 regarding lead times.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Johnny –
Can I use duplicolor clear engine enamel over en50 universal gold.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, you can.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Kelly –
Is this paint safe to use inside fuel tanks
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
While this product resists gasoline, it would not hold up to continuous immersion.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Gabriel Guzman –
Do you sell it for the Navistar DT 466
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we do make that specific color.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Oscar –
Do you have a paint that resembles CAD paint
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
This is NOT the cad gold, sorry.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Sven Christensen –
What is the difference between paint 98-48 or EN-48? How close are they to the orginal chevy orange and is it very glossy? Is either paint suitable for a 1963 Corvette engine. Thanks for your help.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please reach out to our technical team they will be happy to assist 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Anthony –
Do you have Oldsmobile gold engine paint for 74-77 engines?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
You may try this product however it may not be an exact match. We are developing a new program to custom match colors, please check back in a few months.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Suzanne Oakley –
Can I use the paint on outer fireplace? Not in box but next to the box
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It has a 250F continuous heat resistance. You will have to make that determination if the area gets to that temperature.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Dan –
Do you make Buick engine paint it’s red? If so do you have it in stock or have a vendor I can purchase it from?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Our paints were not matched to specific color codes or vehicle model years. Hi-Tech engine enamel colors have been in our line since the 1970s. If you have additional technical questions, please contact our technical support. Regarding item availability and vendor information please contact our customer service department.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
jim –
do I need to put primer first
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, for any engine application with this specific color a primer is highly recommended.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mason –
Any possible way to make a candy apple green color I’ll pay extra ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Hi there, please contact our sales department regarding custom color options sales@seymourpaint.com.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
David A –
Does your EN-71 Dull Aluminum paint match 50-60% gloss Argent Silver ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It’s close but not exact. We used to offer argent silver; however, it’s discontinued.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
dpn –
does this paint dry to a hard finish,is it tough
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it’s gas/heat/oil resistant and has been used in engine compartments for decades.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bob –
Do you have oldsmobile color engine paint
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we don’t have this color.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Daniel –
The color selection is excellent. Can this paint be applied to brake calipers, alternatively?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it has a 300f heat resistance so it would hold up well on calipers.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bobby Ru –
Can this be used on aluminum wheels?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, we would prime first with our self-etching primer, 20-1682. If the wheels are shiny you could improve adhesion by wet sanding with 400 grit sandpaper.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Travis –
Can a plastic intake be primed with one of your products and then painted with one of these colors? If so what primer
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
If it’s hard plastic, yes. I would use the 16-831 light gray primer.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brad –
Can it be used on plastic?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, but only very hard type plastics that have been primed.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Matt –
Can you use this on plastic valve covers
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, assuming the plastic is a very hard type. I’d scuff it and apply a primer first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Michael –
Do you carry Ford Bronze in aerosol pray cans?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Unfortunately, we do not have this color.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Matt –
Can you paint plastic valve covers with this?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, but I would recommend lightly scuffing with steel wool and applying a primer first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tony T –
Do you have 1993 mustang reef blue
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Seymour does not have a blue to match 1993 Mustang Reef Blue.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
allen –
can you supply this in Qt. size?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Unfortunately, we only offer this product in aerosol.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brian Oswalt –
Can this be spayed directly over bare metal engine block?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, this paint was designed specifically for engine blocks! Please make sure to clean the surface first!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Doug Anderson –
Do you offer Dutch Witch Orange Touch up spray paint?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We do not carry Ditch Witch Orange in the Seymour line. Please reach out to sales@seymourpaint.com for custom match pricing and availability.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Lloyd –
What primer do you suggest using with this enamel?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Product 16-831 gray primer is a good choice for engine bay parts.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
bernard mcmahon –
What color is correct for an Austin Healy BJ8 engine? bernard
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We don’t know, sorry. Based on what I’m seeing online, our alpine green has the right hue but is not metallic.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Stephen Mark –
What is a lighter color, dull or chrome Aluminium ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
EN-41 chrome is definitely lighter/shinier.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Stephen Marcz –
Which is lighter chrome or dull aluminum?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
EN-41 chrome is definitely lighter/shinier.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Billy –
Is primer needed to paint an aluminum valve cover?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Our PBE self-etching primer would be an excellent choice.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Shaun Jones –
Would i be able to get a swatch or sample of your paints? I am not sure if the ford blue or mustang blue would be the better choice for my project.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our technical support for additional information at 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mark –
I would like to paint several residential metal doors but don’t want to have them out of service for several days. How quickly will this dry and not cause issues once reinstalled and making contact with door seals?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
The cure time is 2 days…..possibly longer if the paint is applied with multiple coats and/or the drying conditions are humid.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Chad –
Will this work on outside of carburetor?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it will work.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
NICOLAS –
DO YOU HAVE THE GRAY Paccar Engine Titanium Graphite COLOR ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No. We do make a cast irone gray (CA16-48) and a really dark charcoal (16-50 medium bronze).
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Michael Moese –
I am looking for a satin black finish to closely match the Japanese motorcycle engine black. Would your GM universal black fit that bill?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
98-24 is the only satin we make. 20-1679 is a semi-gloss black but it is a pure black in color. I don’t know if either match your engine black.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Karen –
Need engine paint for Ford Mercury 1951/52 called Seafoam
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we don’t carry that color.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Henry Borger –
No Pontiac Blue Engine Spray?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We do not have an exact match, but 16-129 Safety Blue is our closest match.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Angel –
What do you recommend cleaning my surface with for the absolute best results before spraying? Any recommendations?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Depends on the substrate.
For steel – The best thing to do is to remove any rust using a wire brush and/or sandpaper. Wipe down the steel with some solvent to remove the dust, oil, and contaminants. Apply the paint.
For aluminum or plastic – sand the surface with sandpaper and then wipe down the surface with solvent to remove any dust, oil, and contaminants. Apply the paint.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bret Pierce –
I need metallic blue for 1970 olds 442
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
None of our blue paints in the HiTech engine enamel line are metallic. EN-67 GM blue might be accurate though.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Carl Cephus –
Do I need to spray a clear coat over the color coat?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, if you have further questions, please feel free to contact our tech support 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jack Rutledge –
What primer is recommended for this paint?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
16-831 for iron or steel, 16-899 for aluminum.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Charles Arnett –
Is the mopar red a actual color for 1966 stock motors
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Unfortunately, we cannot confirm what model year this color corresponds to; however, product has been in our product line for many decades with no complaints about the color. Please feel free to contact our technical support for additional help if needed 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bret Sundblad –
When painting an engine, do I need to apply a hi temp primer before spraying with your hi-tech engine enamel? Will the color look the same if a valve cover is bead blasted and painted vs an engine block that’s just been cleaned and free from any oil residue? Thank you
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, the color will look the same regardless of the substrate. On bare metal use the 16-807 red oxide primer, for the painted surfaces just scuff them with steel wool.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Shawn –
Will this work well on the firewall and engine compartment?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, folks use it on those applications quite often.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Chris Pellascini –
Do you have a high heat paint for a cast iron radiator heater, in something close to Bright Brass color?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, the EN-50 is our closest match color wise to brass. It has a 250F continuous heat resistance.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Omar –
Can it be used on brake calipers?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it can.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
David gajus –
What color Ford blue goes on a 67 Fairlane 289
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Unfortunately, we don’t know which color corresponds to the model year.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Rob Harris –
Do you offer engine enamel in ’66-’70 Pontiac light blue metallic?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we no longer make that color.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Steve –
Do you have a paint that matches plasti-kote pontiac blue 208 for engine
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we do not.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Willie –
Do you need a primer with this product.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes. For aluminum use 16-899 zinc phosphate primer and for steel use 16-831 light gray.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mark –
Do you have an engine primer? My engine is sanded and clean, but still has some other color paint on it. Thanks
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
16-831 is a light gray primer ideal for engines.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Michael Farago –
Does olds gold engine paint require a primer
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes. And if possible, scuffing the surface to improve the adhesion of the primer would be a good step.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Kenny –
Cans in a case
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
6 cans per case.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
John Brown –
Do you carry anodized colors?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we do not.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mike Cook –
Does the gold metallic dry with a gloss, satin or Matt finish.
Thanks
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It’s more of a matte….maybe satin at best.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tommy Boyles –
After block cleaning, should a primer type paint be applied before the engine color is applied? If so, what type? Thanks Tommy Boyles
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, 16-831 light gray for clean bare steel or iron. If rusted at all, use 16-45 rust converting primer. If aluminum, use 20-1681 self-etching primer.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mike Cook –
Is the gold color gloss or satin finish.
Mike
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It’s very subjective because it’s a metallic, would say between a matte and satin.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tommy Boyles –
After block cleaning, is a primer paint required before color paint is applied?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It’s not absolutely necessary if the block is free of rust and/or pitting. Otherwise, it’s good practice to use a primer.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Terry stone –
Which paint do I need for the exhaust manifolds
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Our Hot Spot brand goes to 1200F. 16-1201 is the part number for aluminum metallic.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Susan Whitten –
I want a silver metallic spray to paint a raw steel planter. I thought this would be a good choice for outdoors because of the durability. Would this be the best paint for the job? Would it be best with a clear coat over it?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Would recommend the CA16-55 Alumi blast, followed by our 16-121 clear coating with UV inhibitor.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Will –
Can the clear engine enamel be used as a protection layer after cleaning/polishing headlights?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, would suggest 16-121 it’s a clear acrylic with a UV inhibitor.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tobin –
Lakeshore Blue B30 for 2012 Nissan Armada SV will y’all have or can make this paint for how much? Pint,quart,
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we don’t make that color.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bobby –
Useable on car side panels?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Not sure what your expectations are, but it can be applied to metal and hard plastics.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tim –
I’m looking for a color match for a 1986 Case 3016.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we don’t have a match. Please reach out to our sales team if you need additional information at sales@seymourpaint.com.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Al –
Do you offer an engine primer to spray on before I apply your engine paint?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, 16-831 is a good choice.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ken Lanier –
Do you have burnt orange
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
In my opinion the EN-76 hemi orange is the closest to a ‘burnt’ orange.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
J. Telep –
Available as retouch paint with applicator brush? brush
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry no, just aerosol.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Rich –
Marina light blue chevy
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, this doesn’t match that model year.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Duane Graff –
Will this paint work on plastic or rubber weatherstrip ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Hard plastics after sanding, yes. Rubber or any soft flexible plastics, no.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Rob –
Could I use the chrome aluminum spray on dual carb vw bug manifolds
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
If the manifolds don’t get hotter than 250F, then yes. If no, the 16-1201 aluminum goes up to 1200F.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ted Dysart –
Do you have Graymarine Fireball Red Engine paint?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, but you are right that the EN-59 is a very good match.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Joseph Prejs –
Is this paint truly gasoline proof?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
While it should not be continually immersed in gasoline, it does have excellent resistance to spills.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Les Steinberg –
: Is this 1949-1976 Cadillac Blue?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
You want our Spruce Line, Cadillac Blue part number 98-53
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ryan Finley –
Will your paint work on plastic parts?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Seymour’s Hi-Tech Engine paint works on Metal, Fiberglass & Wood.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Rodney S. –
I have a 1965 Cadillac. Does your GM Blue engine paint match the Cadillac dark blue engine color?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
You want our Spruce Line, Cadillac Blue part number 98-53
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Dave McDaniel –
Can this paint be used on plastic parts such as the engine cover on a C8 corvette?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
So long as it’s a hard type of plastic and has been primed, yes. I’d use our 20-1671 sandable light gray primer.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Dave –
Hello I want to paint my 5.7 hemi should I prime my block and pan 1 st
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, if there’s pitting. If there’s any surface rust, apply the 16-45 rust converter first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Linton –
Would these paints work on a carburator? I was thinking of you EN50 Gold ( for carb body)and EN 71 Dull Aluminum( for carb throttle body).
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, both will work as they have good heat/oil resistance.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tom Vigdahl –
Is this considered “Corporate Blue”?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Not to my knowledge, no
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Larry Evans –
Is it possible to get a Custom Color Candy Appl
e Red engine Enamel.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
If you look at the MRO, BigRig, Farm and Industry, and HiTech brands, there are multiple shades of red. I would think one is to your liking.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jim Klekas –
What is the correct, as original, color for the engine in 1966 Lincoln Continental?
Do you carry that color?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We don’t have reference charts for specific model years, sorry.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Alan –
I have a bare metal engine block. Do I need an etch primer to go over the metal first or is this product DTM. Thanks Al
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
This is DTM. Apply 2 to 3 coats within 15 minutes of each other and then leave it for a couple days to cure.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jeremy PItman –
I’m looking to paint aluminum, what high temp primer would I use?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
The PBE self-etch primer #20-1682.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tien –
Which products would you recommend for magnesium intake manifolds?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Most importantly I’d use the PBE self-etch primer. After that, you can topcoat with any of our offerings.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mark –
How is being good to 300 F actually good enough when engine blocks get MUCH hotter than that?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Blocks generally don’t get that hot. Anyway, we’ve been selling this paint for decades…if it couldn’t take the heat from a block we would’ve heard about it long ago. Certainly, the exhaust manifold will get hotter, and for that we offer a 1200f high temp paint in silver (#16-1201).
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Joey –
Can you use this paint on plastic intake and valve covers
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, if it is hard plastic. Even then, I’d prime first with the PBE light gray sandable primer #20-1671.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Scott Puazza –
I have high use hand pumps gloss black. What do you recommend for something that gets knocked around frequently
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
620-1415 gloss black MRO industrial enamel.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Charlie –
I’m looking for Ford Oxford White
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Seymour does not carry an exact match for this color.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
John –
Do you have a high heat etching primer to go under engine paint, caliper paint, etc?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, #20-1681 light gray self-etch primer.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Steve barger –
Looking for 1970 model Oldsmobile blue
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we do not.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Kevin Nobbs –
How many cans in a case?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
6 cans per case.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Robert Eliezer –
Do you have the correct Blue color for 58/59 235ci Chevy six cylinder engines?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
The EN-67 should be the right color, however its unknown if it corresponds to that model year.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
KEVIN SHAWVER –
can this paint be applied to brake drums and calipers?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Michael –
Will this adhered to plastic?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Only if you use an Adhesion Promoter
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ron Pokrinchak –
Does your product only come in gloss?No semi gloss or satin?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Semi-Gloss Hi-Tech is 16-139
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tom Davis –
Do you have a silver color
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Hi-Tech Aluminum 16-132
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tony –
Can I get it in chrome,and spray the inside of my KC lights
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
16-1034 is the most chrome like metallic we offer.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bob –
Can you use it on boat out drives?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, it is not intended for continuous immersion in water.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Doug Quillen –
What would you recommend for a automotive radiator?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, but the extreme FX chrome would be a good choice. #16-1034
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Marc –
High temperature Mirror chrome spray paint ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It goes up to 250F continuous.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Joel Nakae –
I bought the en70 clear coat to use over MRO enamel . However I noticed that it has a slight brownish tint that is noticeable when applied over the lighter colors. Specifically light blue and light gray. Do you have a clear coat that is compatible with MRO enamel and is perfectly clear ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we don’t. Just the EN-70. MRO holds up quite well on its own and doesn’t require a clear.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tommy –
Is it Direct to Metal type paint? What is the preparation procedure for the cast iron blocks and heads?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it can be used direct to metal if the metal is clean, sanded, and free of rust.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
RANDALL MARSH –
do you carry a chrome based paint for bumpers ect?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, 16-1034 extreme FX chrome.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brian –
I unfortunately ran out of paint. How long do I need to wait before I can recoat. Soonest I could is 20 hours. Do I need to wait for full cure before beginning to paint again?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Should wait a couple of days to make sure the coating is fully cured so lifting does not occur.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
John cullinan –
I want to order your engine paint #98-53 Cadillac Blue. I do not see where on your website so I can order that paint. Thank y
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
#98-53 product is on our website, should be able to order it.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
William –
Hello, this description tells you everything about the paint other than the gloss? Is it satin, gloss, flat?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It is a high gloss.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tom Dombrowski –
Where is a distributor
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our customer service for assistance.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brad Hieb –
What color in your Hi Tech engine enamel paint line would be a match for 59-65 Pontiac V8 engines?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our Technical Team for further assistance.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
K.F. –
Does the dull aluminum color have a flat or glossy sheen?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
This has a flat finish.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Lance –
Is this UV resistant? Could it be used on the exterior of a vehicle? Thanks.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Svein Simones –
I wanna buy Chevrolet RED (for my 1956). I another question you answered that it could be used with or without primer.
What is the recommendation for best shine and lasting? Primer or not?
What type of primer, nabme/brand and 1k/2K you recommend for a perfect result?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Go with the 16-831 light gray primer for a steel block. For the EN-59 GM red apply your coats in succession and then leave it for close to a week to fully cure. No clearcoat is needed.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Raul Ortiz –
Would you have a matte or flat clear engine paint
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, no.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Doug Sedlow –
Does Hi-Tech engine enamel, specifically Dull Aluminum, have good UV resistance on engines that are not covered by a hood, such as a sand rail engine?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, good resistance to UV light.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Chrissy Murphy –
Can this product be used on the sides and front of a stainless steel oven?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ryan –
Is this a Satin or Semi Gloss? Or between them? What’s the Gloss % of this EN-42?
An also do you make Black SELF ETCHING primer an in this high temp? PLEASE DO!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It is high gloss. 20-1682 is a Black Self-Etch Primer.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
John Jaffe –
Can this product be sent to Canada in bulk, or by case lot?
Thanks,
John
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our sales team at sales@seymourpaint.com
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Darrin frisella –
Do you carry this color in a brush on instead of spray can?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, no.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal