800-435-4482
Big Rig Heavy-Duty Industrial Enamel—Cummins Apex Red (16 oz)
High Solids Apex Red Big Rig Industrial Enamel Spray Paint
Product Line: Big Rig SKU: 20-1642$16.00
Seymour Cummins Apex Red Big Rig Heavy-Duty Engine Enamel Spray Paint Product Details
Seymour has been the trusted name in coatings since 1949, and we don’t plan on giving that up anytime soon. Our Big Rig Apex Red Heavy-Duty Engine Enamel Spray Paint is built for industrial-strength performance, featuring a high solids formula that delivers superior coverage, durability, and protection.
Our fleet maintenance enamel paint is designed to handle the toughest jobs and stand the test of time. It is rust-resistant, chemical-resistant, abrasion-resistant, and heat-resistant up to 300°F. Shall we go on?
Its quick-drying formula and durable finish make Seymour’s Apex Red Big Rig Enamel Spray Paint the practical choice for efficient application and lasting results. Trusted by pros everywhere, this is paint that works as hard as you do.
High Solids Formula Delivers Maximum Performance!
Our high solids formula sets the standard for industrial-strength engine enamels. By using a higher resin concentration and fewer volatile compounds, we achieve a brighter, more durable finish. Less evaporation during drying means superior coverage with fewer coats, which saves time and materials.
Designed for fleet maintenance and industrial applications, our Apex Red Big Rig Heavy-Duty Enamel Paint offers superior adhesion and advanced penetration to protect against rust and corrosion while delivering consistent, flawless results. When you need performance and efficiency, Seymour gets the job done right.
Exceptional Durability with No Flaking, Cracking, or Corrosion
Our Big Rig Heavy Duty Enamel Spray Paint is engineered for maximum durability. Even under the toughest conditions, it keeps your surfaces free of flaking, blistering, and cracking. This industrial-strength enamel also protects against heat up to 300°F, rust, corrosion, oil, gas, and abrasions, making it ideal for demanding environments.
When it comes to aerosol coatings, this is as tough as it gets. Our high solids enamel forms an exceptionally resilient layer that rivals the performance of a powder coating—without the need for a curing oven! It’s the strongest coating you’ll find in a spray can, engineered for heavy-duty applications where durability can’t be compromised.
Whether you’re working on vehicle frames, engine blocks, metal structures, or heavy machinery, our advanced formula delivers a consistent, flawless finish that withstands environmental and mechanical stress. Seymour gets the job done—no cracks, no compromises.
Available in a Wide Variety of Popular Colors!
You shouldn’t have to choose between strength and style. With Seymour, you don’t have to! Our Big Rig Enamel Spray Paint is available in a wide range of colors, including Apex Red. Each shade is formulated to provide a pro finish that lasts. Your projects are protected, polished, and lookin’ good.
Suggested Uses for Seymour’s Apex Red Big Rig Heavy-Duty Engine Enamel Spray Paint
Seymour Big Rig Industrial Enamel paints and protects for the long haul. It is ideal for:
- Fleet vehicles
- Vehicle frames
- Engine blocks
- Restoring metal parts and equipment
Made in the USA.
- Ideal for vehicles frames, engine blocks, protecting metal structures and restoring equipment
- Resists heat, oil, gas, abrasions, and rust
- Protects and does not flake, blister or crack
- Comes in a wide variety of colors
| UPC: | 043281009201 |
| Part #: | 0000201642 |
| Container Size: | 20 OZ |
| Net Fill Wt. OZ: | 16 |
| Net Fill Wt. G: | 454 |
| Prop 65 (cancer): | yes |
| Prop 65 (repro): | yes |
| Safety Data Sheet: | View Safety Data Sheet  |
| Product Information Sheet: | View Product Information Sheet |
Question
Patrick Sheehy –
I am restoring a 1940 walker turner drill press. What is the difference between MRO and Big Rig? Which is better for industrial machine applications?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
MRO and Big Rig are essentially the same thing, just marketed to different industries. Feel free to choose either. If you have further questions, please contact our technical support at 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brandon R. –
How UV resistant is this?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It will hold up for years in sunny locations before you notice a loss of gloss and/or color.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Marcello E Cavallo Jr –
Is the school bus yellow a gloss ?? I’m sorry if I missed it in the description, thank huh
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it’s high gloss. no worries 🙂
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Dave –
I âme restoring a vintage 60’s Triumph motorcycle frame. Rear section is raw mild steel. Front section is original baked enamel. Will this work over both surfaces and will it hold up pretty well to chipping? I’m trying to avoid the cost of Powdercoating with is expensive and not very original but would like to know this paint will offer some hardened protection. I assume it should be used without a primer coat.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
You can use with or without a primer on new milled steel. If the enamel paint on the front is glossy you should probably wipe down with a chemical deglosser or wet sand with 600 grit to improve adhesion. For the topcoat, I’d apply 2-3 light coats within 10 minutes of each other and then leave it to fully cure (72 hours).
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jeromey –
Can this be used on a semi truck frame that is already painted a different color without the fear of flaking or peeling or should the original paint be removed?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
As long as the paint you’re going over is free of dirt and grease and is oil based in nature, the big rig will stick to it permanently.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Marcello –
Can this be applied directly to bare metal without primer?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, people do this quite often. That said, I would only recommend that process over clean bare steel.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Shane –
How to know if the product is a gloss?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
This product has a flat or semi-flat finish depending on your terminology.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Gary –
Looking for semi gloss blk.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We don’t have semi-gloss black in the Big Rig product line; however, you can find it in our HiTech enamel product line. #16-139 is the part number.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Logan –
What is the difference between Seymour MRO Industrial High-Solids Spray Paint and the Seymour Big Rig Heavy-Duty Industrial Enamel?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Similar high solids formula, different colors. Big Rig was designed for an automotive fit.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Wanda –
Can I paint the outside of my stove with this paint?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
I would think so. It has a continuous 300F heat resistance, which should be enough for the exterior surfaces. If need please contact our technical team for further information.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ramon Aviña –
Puedes mandar a Guadalajara Jalisco mexico
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Hello, please contact our sales team for further information at sales@seymourpaint.com.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jason –
Is this paint flat or gloss?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It is high gloss.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Fred Johnson –
I am looking at repainting my freightliner hood with the big rig fleet white. Do I need to clear coat on top of it? If so, what clearcoat do you recommend?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It’s not necessary to clear coat, but if you do, please make sure the fleet white is FULLY CURED first. This could take anywhere from 3-7 days depending on thickness and drying conditions.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Steven Gerace –
Can you paint over it with any type of automotive urethane base coat clear coat paint??
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Once cured, yes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mike V –
Can I use this on the lower front bumper,the plastic valance of my F-150?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, but it should be primed with our PBE sandable primer first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tara Norris –
Is this waterproof?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, would consider 20-1661 Big Reg Detroit Diesel Alpine Green waterproof.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Michael –
2012 Freightliner cascadia red and where can I get it
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we don’t have an exact match to that shade of red. If you need additional information, please contact our customer service team at 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Adam –
Is cold galv 20-1645 an enamel or a primer?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It is a primer but due to its high zinc content for corrosion protection it could be left as is.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bryan –
Does this have a wide fan pattern?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It has a cone shaped pattern. Would consider it normal, not wide like a vertical triangle.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
William Wharmby –
I’m looking for a durable primer topcoat clear coat combination for my motorcycle restoration. Which of your products do you recommend?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
20-1661 is a high gloss. Would recommend 20-1631 light gray primer followed by the 20-1661. A clear coat is not necessary……and is discouraged in this case as the alpine green is a superior coating to the clear we offer.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brady –
How closely does the big rig cast blast match the traditional cast blast?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Same color.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ken Neuhoff –
Does this march or do you have Craftsman tool box red ?!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Our best match to Craftsman red is 20-1642 apex red.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Emanuel –
Hi This one works on the calipers
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it is heat resistant enough to work on calipers.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Eric Hansen –
Can you paint over bare metal spots
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, so long as there is no existing rust.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Steve –
Does it come in Matt black
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Flat and matte mean the same thing—no sheen whatsoever.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mario –
No semi-gloss available ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Unfortunately, no.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Sean –
Semi gloss?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, but 620-1439 is a high solids semi-gloss black.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Marshsll –
I bought a truck from up north that has some surface rust on the undercarriage. My plan is to use Seymour rust converter and then topcoat with Big Rig gloss black. Should I first spray with Rust Kutter or equivalent before using a degreaser and then spraying the rust converter?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Would degrease it then wire brush or grind off as much rust as possible before using the rust converter.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tom unversaw –
Hi would you recommend this paint for a large toolbox? I’m restoring my old toolbox that is in great condition.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes. My son did his toolbox with the same kind of paint, and it turned out great. Just give it upwards of a week to fully cure before putting back into service.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tony –
I’m replacing a Bender on a car. Would this be a good product?
To apply, I don’t have a decent vanish.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
You could try our PBE trim paints….#20-1677 gloss black.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Joel –
Do you have a recommendation for painting over aluminum in regards to prep and primer?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
20-1681 self-etch primer over aluminum that has been cleaned, and any corrosive scale has been removed.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Varise –
Is cast blast for exhaust manifolds,dry in an oven ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, you could heat cure the manifold in an oven after you let it dry to touch for an hour or so first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Eric Anderson –
Do you offer Cat Yellow or ISX Red by chance?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
20-1642 is cummins red and 620-1443 is cat yellow.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
David Chapman –
Is it oil based?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mike –
Can that be painted over older paint?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it can be used over older paint, but you must properly clean the surface first. Make sure to remove any dust, grease, or dirt from the surface first. MRO primer is also recommended for best results.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Colton –
I am using the chassis black paint and I will be applying it around 60*F but it will be dropping down into 30s during night. Is that okay as long as the paint dries for an hour or 2 before it drops?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Michael –
how close a color match is 20-1623 fleet red to 20-1642 Cummins Apex Red Spray paint?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Apex red is darker by a couple shades.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
at –
What do you recommend to prep aluminum for this paint?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Wire brush off any corrosion and then prime with the PBE self-etch primer.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Thomas booth –
I am loving the black frame paint, I am a truck driver pulling an rgn heavy haul trailer. The deck gets scratched up all the time. Can I get the truck black frame paint in a can to go in my spray gun or just in the spray cans.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our sales team for further assistance at sales@seymourpaint.com.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Frank –
is the 20-1623 Cummins engine red?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
20-1642 is Cummins Red.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal