800-435-4482
620-1427 Seymour MRO Industrial High-Solids Spray Paint, Safety Blue (16 oz)
Product Line: MRO SKU: 620-1427DISCLAIMER: The color swatches provided are intended to closely represent the actual colors; however, please note that there may be variations from what is displayed on your screen.
$16.00
Seymour's MRO aerosols are high-solids, industrial-grade line of coatings specifically designed for Maintenance, Repair & Operations. This High-Solids formula provides long-lasting durability, does not run or sag and long-lasting corrosion protection in the toughest environments.
- Extremely Durable, Industrial-Grade High-Solids spray paint, for all your projects when conventional spray paint just wont cut it
- Won't run or sag and resists oil, gas, heat, abrasion and sunlight
- High-Solids formulation for twice the coverage of conventional spray paints
- Dries to touch in 30 min. Hard Cure 2-3 days.
- Up to 18 sq ft coverage per can
| UPC: | 043281006781 |
| Part #: | 0006201427 |
| Container Size: | 20 OZ |
| Net Fill Wt. OZ: | 16 |
| Net Fill Wt. G: | 454 |
| Prop 65 (cancer): | yes |
| Prop 65 (repro): | yes |
| Safety Data Sheet: | View Safety Data Sheet  |
| Product Information Sheet: | View Product Information Sheet |
Question
chaz –
620-1446 Seymour MRO Industrial High-Solids Spray Paint, Ryder Yellow (16 oz) in stock?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
chaz –
620-1446 in stock?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our customer service at 815-895-9101 regarding inventory/stock.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Chuck Sharin Chuck’s Automotive –
May I assume that MRO aerosol high solids enamel is SEYMOURS most durable highest quality paint versus Acrylic LAcquer PBE……Asking that Seymour considerr adding a SEMI Gloss Black MRO
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We truly appreciate your feedback. We are not expanding the MRO line at this time, but if you are interested in private labeling a Semi-Gloss Black MRO please reach out to our sales Department for more information. Sales@seymourpaint.com
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bruce –
We have a 21 rubicon that is hydro blue can you match that color?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Our 620-1426 would be a close match but not exactly the same. Please contact our technical team at 815-895-9101 for additional questions.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Miguel –
Can I use seymour 620 -1432 spray paint on fiberglass?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, you can apply 620-1432 over PRIMED fiberglass. I’d recommend our Spruce primers.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
James manning –
Can I use your MRO to paint over a brass light fixture ? If so what prep would be required?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, I would scuff the brass with a scouring pad or 400 grit sandpaper to help the paint adhere properly. A primer over the scuffed brass would also help.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tammy –
Will this paint adhere to plastic and rubber?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It will not adhere to rubber as it’s too flexible. As for plastic, it will adhere to only the hard types….and ideally the plastic is sanded and primed first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Karla –
Which color is a closer fit to Mojave jeep. Omaha or JL orange?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Omaha orange would be the best match.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Martin –
Can i use it on plastic, no primer?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Product will adhere to only hard type plastic and ideally sanded and primed first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jim Pearson –
Do you have 620-1443 in stock?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our customer service team for item availability 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Josh Padilla –
Can this product impact a cathodic protection system?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it would. Further, this product is not intended for use below the water line or on galvanized metal.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Lane Truett –
Is this paint a gloss finish? Industrial. MRO
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
620-1433 has a flat finish.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brad –
can it be used in very wet areas?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes. It just can’t withstand continuous immersion in water.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Steve Stanley –
Is this a gloss paint? Is it available in flat or satin? I’m looking for a gray enamel with a sheen similar to the Seymour Cast Blast.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It is high gloss. You could try the charcoal color in our roof paint line (#16-1703). It has a flat finish.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
chris osvalds –
are replacement nozzels available for the MRO spray paints?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our customer service regarding B-13 nozzles.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
CHARLES FURNARI –
Are your paints work with rust-oleum enamel?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes. Assuming the Rustoleum paint is fully cured, you can topcoat with the MRO and not have to worry about an adverse reaction.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Pat Oates –
What High Solids Paint matches closely to Kubota Orange?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Because it’s more of a reddish orange, our EN-48 or 620-1432 would be a good match.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
David Barnette –
I am trying to find a color that Duke energy has on the pad mount green and it is a seymour product. can you help me ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Unfortunately, we do not carry however we can custom match. Please contact sales@seymourpaint.com for order minimums and pricing.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Pat Oates –
Which orange color matches Kubota
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We don’t have a color called Kubota orange, but 98-48 chevy orange is very close.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Holly Ramirez –
Can 620-1433 be used repaint inside the firebox?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It has a heat resistance of 300F continuously. If you don’t feel that it would withstand that temperature, you could opt for #16-1203 black which goes up to 1200F.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brian Coulston –
What are the storage requirements for MRO Product 6201413, white? Does this product require storage in a fire cabinet via OSHA or Fire Regulations?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It depends on how many cans. The NFPA publishes a guidebook that explains the requirements, please contact your local fire department for a recommendation. Aerosol cans should not be warehoused in subfreezing temperatures or exposed to temperatures above 120F.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Daniel Hicswa –
Hi are any of these stainless-steel paints available in Qt?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We have a 5-gallon pail part number 0-554. Please contact our sales team for more information at sales@seymourpaint.com.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Donovan Henry –
about to buy gloss white to do my wheels. I’m reading that you dont recommend a clear coat. I was going to use a 2k. Is that still not advisable or needed?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
This has a high gloss finish and would work well by itself on the wheels. If you do decide to clear, give the white upwards of a week to fully cure first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Donovan Henry –
Doing my wheels with this. Do I need a clearcoat? I was thinking of using a 2k
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
This has a high gloss finish and would work well by itself on the wheels. If you do decide to clear, give the white upwards of a week to fully cure first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Fastenal Company –
is this sunbelt green 0006201437
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes. We just can’t call it that because of copyright concerns.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Rodeo –
Where can I find a list of carriers so that I can shop in person?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our customer service team for information regarding distributors/stores.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Beth Holley –
What is the best acryllic latex spray paint to use on galvanized metal?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It depends on the project. What are you painting exactly?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Dustie –
Can u paint a truck with this stuff ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes! MRO was specifically designed for metal and wood applications.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Lisa Taylor –
can you use this on furniture cloth?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No. This paint is not intended for fabric.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Gary Kolenich –
I’m painting Cammo graphics on my RV and it is outside. Would I need to tarp it?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No need to cover with a tarp because of our product. It has excellent durability in sunlight and weather.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Michael –
Can this be used on plastic ( hubcaps)
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, but only hard type plastics that have been scuffed up and primed.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tom L. –
Dose this paint come in a matte or satin finish?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, just high gloss.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
David –
Is there a protective clear that works with the Industrial MRO line?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We don’t recommend it, but the EN-70 clear in the HiTech line is a compatible formula.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tom –
What does SB Green look like and does SB stand for anything?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
SB stand for SunBelt green, like the forklift company.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Lane Truett –
Is this a gloss finish
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it is high gloss.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mark Metzger –
Hi, do you have Edge Red for high heat (300 degrees) for engine shroud. Prefer spray can. It is the color used on C8 Corvette engine sections. Thanks!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We don’t have edge red, but one of our reds in the MRO or HiTech brands might match. Both brands would have 300F heat resistance.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Robert Griffin –
Do you sell this paint in a pint or a quart?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We only offer in aerosol or gallon part number 1-1423, however depending on your location product may not be available. Please contact our sales team for more information sales@seymourpaint.com or 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Robert Griffin –
Do you sell this in half pint or pint?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We carry this paint in gallons only (#1-1423).
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mario nonnenmacher –
Does this paint require a clear coat?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, it does quite well by itself.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ken –
Would this be considered a matte orange paint
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, it’s high gloss.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
William K Berg –
Is 620-1417 ANSI 49 a water or oil based paint? Can it be used on metal?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It is oil based and is excellent for metal.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
julie –
can this be used in a fireplace and good for high heat?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It has a 300F continuous heat resistance. Would say probably not the right choice. Please contact our technical support for further assistance 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Nathan Welle –
is the MRO oil based acrylic or other
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
620-1453 Tan is an enamel. No acrylic.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brian AMES –
the MRO paints can be used on engine blocks?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, they have excellent resistance to heat/gas/oil.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Steve –
Is primer needed on sand blasted metal or can MRO be painted directly to metal? I had some parts painted with your paint and I don’t think they used any primer on them.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
MRO does not need a primer underneath for corrosion resistance. MRO is a direct metal product. However, if you would like the “maximum†corrosion resistance, should use the 620-1431 MRO Gray Primer underneath the MRO paint.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Matt Price –
Is this available in Satin?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we do not have this available in stain.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
KellieF –
Can this paint be clear coated? If so with what type of clear coat?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It can be clear coated ONCE CURED, but normally the clear isn’t of the same quality as the MRO so there isn’t really a benefit.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bob Erdmann –
I used a can of flat black on cast iron and it certainly isn’t flat. Does that change with curing? Right now your satin black enamel seems to have less shine.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
The flat black is not glossier than our stain black enamel. Please contact our quality control department for further assistance 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Nick stackhouse –
Do you sell to the us government
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our sales team at sales@seymourpaint.com.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Dennis –
How would it do on a gear shifter with all the shifting?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It will work. That said, over time (many months) the oils from our skin will wear it down and you’ll need to recoat.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
JD –
Would this work on a cast iron, ceramic coated sink? I intend to lightly sand the sink without removing the ceramic first. If so, would a primer be necessary, or just helpful?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it would work (no primer necessary if you’re scuffing the ceramic coating). That said, this paint won’t be as hard and scratch resistant as a 2 component epoxy or urethane but those are rather expensive. Kind of a tradeoff you could say.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Robert baker –
Do you have a clear coat to apply over paint ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
The 620-1436 should not need a clear coat. The 620-1436 is an enamel spray paint. If you would like to clear coat the 620-1436, would recommend the EN-70 which is also an enamel. Please be very careful in applying the clear coat make sure that you have allowed several days for curing before clear coating so the 620-1436 does not wrinkle. Again, you should not have to clear coat the 620-1436.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bruce Whitman –
what is the color code for this yellow? I am looking for Safety Yellow Pantone 109C
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
The 620-1419 looks like either RAL 1018 or Pantone 106C.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Kevin –
Will this paint adhere to stainless steel?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, assuming the stainless steel is free of dirt and grease.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Darell –
Do you have teal
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Unfortunately, we do not have the color teal.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Barb Bsldwin –
What paint can i use for a cement dining table please
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we don’t make such a product. A water-based enamel would be a better choice for a concrete dining table.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Richard Seubert –
What paint do I use on a refrigerator?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
If you are trying to replicate the look of brushed stainless steel, the 98-17 nickel is our closest match. Please contact our technical support for further assistance.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Andy Manning –
What color matches John Deere green
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
16-268 is the exact match.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Rick Fox –
I’m looking for a replacement for Krylon’s discontinued 325 Machinery Dark Gray ASA49 spray paint (application is for machinery restoration). Is your 620-1417 comparable with that, and is its sheen semi-gloss or gloss?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
620-1417 is ASA-49 and has a high gloss finish.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Frank Smith –
Can this be used on a stainless steel bathtub?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It is not recommended for immersion in water.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ryan –
Is this an enamel or lacquer based primer? Wondering about top coat of other automotive paints.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It is an enamel base.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Oz –
Is this UV stable? I’m looking to paint some vents that’ll be on the top of my hood on my jeep and hoping to avoid fading. Is this a good option or should I pick something else?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, this paint has good resistance to UV light.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Vini –
Is this “Seymour MRO Industrial High-Solids Spray Paint, SJ Orange” the same orange as Skyjack orange?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it is.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jose –
Can you spray on 2k clear coat this paint ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Robert –
Do you have a swatch of each color that I could keep at my sign shop? Sometimes you need the perfect color.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we don’t have swatches available.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jeff hittle –
Does Seymour produce an old white? Bright white doesn’t look right on a 6+ year old truck
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
20-1613 is called fleet white and is just a bit of an off-white. For a more yellow-ish/cream off-white go with 16-140 colonial white.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Donald Brown –
Can I use this paint on galvanized metal? If not what paint do you have that I can.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
If you prime first with our 16-1445 cold galv you can then topcoat it with the 620-1441.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
James –
How can I order matching paint for my 2006 corvette ruby jewel capilers
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we don’t carry that specific model year. A close match is probably the best we can do, please contact our technical support for further assistance 815-895-9101.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Terry steele –
Do u offer spray cans for steel wrought doors black color.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes. I think #16-70 bronze (it’s dark charcoal almost black) or the PBE trim black (flat, semi-gloss, or high gloss) would work well.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Marguerite Bellemore –
Does this paint come in a satin finish?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, just high gloss, sorry.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Big AL –
What would be a close match to PR4 Flame Red?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We don’t know if our paints match specific brands and model years, sorry.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jason von Nicolas –
I actually have 2 questions. First, does this paint require priming on aluminum? Second, is the finish flat, semi-gloss, satin or gloss?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, you should prime first with 20-1681 self-etch primer. The aluminum paint has a satin sort of sheen.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Wayne –
Can this be used to paint disk brake calipers
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mark Woodland –
Is this a gloss or semi-gloss finish?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It is high gloss.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Kevin –
would this paint hold up on plastic in a hot tub?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, it would not.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Maxine Holt –
Do you send out color swatches.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we do not.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mark Pollack –
Can you use a clear over this paint for better protection?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
The red clearcoat we make would be the best. But if you do choose to topcoat with a clear, make sure to give the base coat at least 3 days to cure before using EN-70 clear.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Matt –
Does the ENAMEL come in a bulk paint for a spray gun? Or only in the aerosol cans ??
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Only Aerosols.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Renee K Trust –
What clear coat if any is recommended over this paint? I am painting and gilding a sign carved from high density urethane foam. I need to decide ahead of time to clear or leave it bright.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
If you do choose to topcoat with a clear, make sure to give the red at least 3 days to cure before using EN-70 clear.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Daryl –
What is the best clear coat to use with this line of paint?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Don’t recommend clear coating, but EN-70 is compatible. However it is high gloss, so it would make sense to just use 620-1413 high gloss white.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Stephen Coleman –
Cummind Beige…..does it come in flat?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Unfortunately, no.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Robert –
If I use the High Gloss White Enamel spray paint on my stainless steel kitchen sink (after lightly sanded), how long should I wait to turn the sink on (to quickly wash my hands or a dish, not to fully submerge anything)?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Probably at least 8 hours. Dry off any water with a paper towel until the paint is fully cured (at least 2 days).
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Doug –
what are the dry – repaint – retouch times on this product?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Before 1 hour or after 48 hours.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Carter J –
Would this spray paint work well on using as a touch up paint for shipping containers?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Anita Keen –
I have wedding cake stairs for my
Swimming pool, the metal hand rails need repainted. Will this product hold up to pool chemicals
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, sorry.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Doonald –
Will this adhere to flexible hapylon vinyl (zodiac inflatable boat)?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, it will not.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ben Santos –
Can you use this paint on plastic engine cover?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, if it’s a hard plastic that has been scuffed and primed with our PBE sandable primer first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Zach Oakley –
Can I use this to paint the coil springs on my truck shocks?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bob –
Do have a paint for inside the motor / machinery /engine
Like a insulating red enamel
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we don’t make anything for the inside.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bob –
Is good for inside a gear box or engine. Filled with oil and heat
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, only the outside of a block.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Michael –
Do you have Toyota’s 6M1 paint code?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We do not, sorry.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Anthony –
Can it be used on metal drip edges
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it will do well in that scenario.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Eric J.Volmert –
Can you get this in a gallon?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, please call our office for further assistance.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Eric J.Volmert –
Is this chemical/gasoline resistant?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it is gasoline resistant.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
A. Anne Holcomb –
Can this paint withstand the heat of steam & hot water radiators?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It should as it resists heat up to 300F continuous.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Kirk –
Can mro be clear coated
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, but ONLY after it has fully cured which could take a few days.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Anthony –
Can this paint be used on automobile valve covers?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Anthony –
Can this paint be used on automobile valve covers? Also, does it need a primer?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes. You would only need a primer for bare metal.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Steven –
Only flat and gloss options? No satin finish? Need satin black.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
98-24 in our Spruce line is satin black.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Daniel Cason –
Is this paint UV resistant?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it holds up very well outdoors.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Curtis Payne –
Does it come in a Satin or Matte finish?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, just high gloss.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
James –
Looking for John Deere green
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
16-268 is JD green.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
T –
Can the MRO be used on galvanized metals such as pipe?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, but it should be primed with the 16-1445 cold galv primer first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Art –
Can this paint be purchased locally or is it sold just online?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our sales team for further assistance at sales@seymourpaint.com.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
David Mosher –
Would your Stainless Steel Paint work for Vehicles like a Shuttle Bus?
(I KNOW I would need More than 16oz…)
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it gets used on vehicle parts all the time due to its good corrosion resistance.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mike –
Would there be any benefit to thermal curing?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
There’s no benefit to using heat to cure.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Kelly –
I don’t see a list of suppliers or “where to buy”
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Hi, please contract our customer service team.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Curtis –
Does this come in a Satin or Flat finish
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Except for flat white and black, MRO is strictly high gloss.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Troy Rodgers –
Do you offer anything in semi gloss / satin ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Most leafing metallic silvers don’t really have gloss that you can measure, but this one and the CA16-55 I would consider satin or low luster.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
David –
You have any Ford have any Ford engine blue colors
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
EN-46 is the medium tractor blue and EN-56 ford mustang blue is the more royal blue shade.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Dave Corbett –
Where is this product available to purchase
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
You may purchase on through our website or on Amazon.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Rey –
Hello I have an aluminum pergola that was brown I’ve had a couple painters paint it and the paint stays pealing and blowing of within a year. I’m wanting to paint it my self this time any recommendations? Thank you
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
With aluminum you have to use an etching primer. 20-1682 is our etching primer part number. After that, you can topcoat with any spray paint color of your choice.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tony –
Do you have a,header paint. Or high heat
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
620-1411 goes to 250F continuous, but we make a 1200F paint in silver that might be a better fit. 16-1201 is the part number.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tony Calhoun –
What sheens are the MRO line of spray paints available in?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Except for flat white and black, MRO is strictly high gloss.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Peter –
Is this paint chemical resistant? ie. Gasoline, brakekleen?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
steve –
can I wet sand this paint?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
It doesn’t have a high gloss finish, so wet sanding would have little to no effect.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
donna –
can you use this on a fiberglass pool slide?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
If you sand the slide and prime it first, then yes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Joe Driscoll –
I have a 14 x6 open trailer I want to paint white. Is this Mro good for this. I also have 4different type trailer hitches will this be good for them also. Thank you
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, this would be a good choice for the trailer and hitches.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Patrick Koval –
What primer do you use with this paint?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
620-1431 light gray or 16-828 black.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Darrell mitchell –
Is it available in marigold color
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Not sure what you mean by marigold but would suggest you look at 16-212 old equipment yellow and 16-286 school bus yellow.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Paul –
Can I get some color swatches for the blues sent to me?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
We do not have color swatches, sorry.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jeff –
Do You offer A Primer
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, #620-1431 light gray.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Tom Hufnagel –
I need to paint handicap emblem on cement. It will be driven on by cars. Will your paint work?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Would strongly recommend clearcoating over the aluminum paint with #20-650 Stripe ultra clear.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our sales team at sales@seymourpaint.com
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Eric Johnson –
Do you have a color match for Kennedy Brown or Red tool boxes? I bargain hunt for old, American made tool boxes and a heavy duty, powder coat alternative would be really helpful.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we do not.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Rodney –
Which Green, matches the John Deere Factory Green?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
16-268
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Trevyn StClair –
How does it work on aluminum???
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes! Seymour’s MRO works best on metal and wood surfaces.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Rmon Hernandrz –
Do you make a clear?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Harley Hord –
Does bare metal need primer?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
A primer is not required for bare metal. Please make sure the surface is cleaned first
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Matt –
620-1449 dark green—is this a satin or gloss finish? How many cans needed for 4 car rims. What primer do you recommend
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
MRO 620-1440 has a gloss finish, we recommend MRO 620-1431 Light Gray Primer for best results.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
MRO 620-1449 Dark Green has a gloss finish, we recommend using with MRO 620-1431 primer for the best results
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes! MRO Flat Black 620-1433
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes! MRO Flat Black is part number 620-1433
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
John –
Can i use your paint on a cab over truck.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ken –
How long to wait between coats
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint (verified owner) –
10-15 minutes. Apply all your coats in succession then leave it to cure for a couple days……longer if it’s hot/humid.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Greg Kelley –
Can I paint my older pickup truck red gloss?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes. Scuff it up slightly to improve adhesion.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mema –
Is this paint safe for bird cages
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, once cured it is non-toxic.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Gerald Anderson –
Do you have a bronze color
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
16-50 medium bronze. It looks like a very dark charcoal gray, almost black.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Charles Perry –
I work out of a mobile tool cart and push it literally miles every day and it’s getting pretty beat up. What would you recommend on it to resist dings and chips/abrasions?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, the MRO brand but not the color aluminum.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Bill –
Would it work to hide rust on garage doors ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, but would apply the 16-45 rust converting primer first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Kade –
I’m going to paint the frame of my pickup truck. Are the big rig, mro, and stainless-blast all the same (comparing stainless steel color)? What one should I use and should I get a primer and clear coat?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, they are all the same. A primer is not necessary if the metal is rust free and clean. Only use a clear (16-121) if you need a high gloss finish.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brian –
What primer on steel?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
620-1431 light gray.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Rambo –
Can the 620-1419 Seymour MRO Industrial High-Solids Spray Paint, Safety Yellow be used on a fire hydrant?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, it will hold up well.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Kurt –
Would this be a satisfactory finish for automotive wheels?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, as it tends to burnish. After thoroughly sanding the wheels, would recommend CA16-55 followed by the 16-121 clear topcoat.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Conrad –
It would be great to see MR0 in a satin (chassis) black as that color is difficult to find.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
In the meantime, we make a satin black in the Spruce line 98-24.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Glenda –
Is this a matte finish?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, high gloss.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jason Revis –
Can your paint be used on plastic? Like model cars?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Hard plastics that have been sanded, yes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Sharon Jaffee –
Will you make a custom color? Spray or liquid is fine…
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brian Muller –
Would you have this in International Harvester Red? Your color chart looks close.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
16-214 is IH red. It’s the same high solids formula as MRO.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Phil Blaquiere –
Do you have a paint with a paint code PSB?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we do not.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mountain –
I am trying to get “Dark Victory Red” to touch up my Harley 1995 FLHTCU EFI 30th Anniversary Electra Glide Ultra Classic! PLZ HELP?!!!!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
While not exact, our closest match is 16-122 gloss true red.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Russell steif –
Do you sell this on gallons for a spray gun?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Please contact our sales team at sales@seymourpaint.com.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Charles W Porter –
Can you paint this on wood ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, but the wood needs to be primed first. 16-831 gray is a good choice.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
kevin –
can this be used on polymer materials like polymer gun stocks
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint (verified owner) –
Yes, with the right primer. Would scuff the stock with 400 grit sandpaper and then apply the PBE sandable primer (#20-1671). For the topcoat, apply 2-3 coats in succession about 15 minutes apart and then leave it for a few days to fully cure.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Rick Mortensen –
Could it be used on an air-cooled vw engine tin?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
You’ll likely need the PBE self-etch primer first. #20-1681. After that, I’d direct you to CA16-55 alumi-blast. It’s the better option as it doesn’t burnish.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Michael Viscardi –
What colors would be closest to John Deere Ag green and yellow?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
16-266 and 16-268 are exact matches.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Kevin –
Can you use the MRO high solids paint on polymer gun stocks?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Chris –
Do you have a match for Toro red?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
16-214 IHC red is a very close match.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Brian –
Are any of the 3 orange colors a close match to Kubota orange?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
EN-48 is a very good match to Kubota orange.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Christopher Strubbe –
Does it require primer?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, if you are painting clean bare steel. For all other substrates, yes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Gerald Sheffield –
Does your Seymore blue paint match exactly with Miler Welder blue used on their welders?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, it’s not an exact match.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, no.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
WM Corcoran –
I need to paint parts of m john Deere tractor/mower. Which of your spray paints best match John Deere Yellow and John Deere green ?
Thanks, I’d like to try your products !
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
16-266 and 16-268 are exact matches.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ed monahan –
I have a van I was going to paint with rustolean but now I’m thinking about using your high solids , after it hardens will it keep its shine
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint (verified owner) –
Yes, definitely. You can also wax it once cured for an even better shine.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Steve Sumstine –
What primer or base should be used, or just spray on bare metal?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
If the metal is clean and free of rust the MRO can be applied direct to metal.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Jackson –
I see that both the MRO and engine enamel are heat resistant to 300F, gas, oil and chemical resistant. Is there a specific reason the engine enamel would be better for painting a motorcycle engine? Would It be detrimental to painting an engine with MRO? I like the color options better with the MRO, that’s why I ask. Thanks for the help!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
MRO and HiTech have similar performance characteristics, so you can’t go wrong with either on a block. However, MRO will not run, or sag and it has excellent single coat hiding.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Lou –
What primer or prep steps are required to apply to steel frame, chassis and steel inibody sheetmetal?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Wire brush any rust down to bare metal (use rust converting primer on surface rust), then clean/degrease before painting.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Frank –
Can u use on plastic
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint (verified owner) –
Yes, if it’s hard plastic that’s been sanded and the PBE primer applied first.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ricky –
Never used your product. I run a transmission shop we rebuild transmissions stock, performance and off road. I need a paint that is very durable and wont scratch off while installing it into vehicles and last through punishment. Rustoleum and Krylon just doesn’t hold up like I want. Will yours? and what do you recommend I go with 620-1411 Seymour MRO Industrial High-Solids Spray Paint, Aluminum or 620-1436 Seymour MRO Industrial High-Solids Spray Paint ?
Thanks.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Definitely go with the 620-1436 as the first choice. If you need a silver/aluminum, EN-71 dull aluminum would be the most durable choice.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Mark Pickett –
Is this paint product suitable to use for automotive frame & underbody components (ex. Drive Shaft, Leaf Springs, underside of car & fenders). Same for interior cockpit coatings that will be largely behind finished panels or carpet ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Would instead use CA16-55 Alumi Blast for the underbody and 16-1034 chrome for the dash components.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Skipper –
Will this work with fiberglass
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Yes, if it is sanded and primed first. Also look at the 16-1034 chrome as it will not burnish or rub off.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Ron –
can you use this on vinyl car dashboards?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
No, but you can look at our Colorbond brand for those. http://www.colorbondpaint.com.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Eric –
Might be a dumb question but I can’t seem to find the answer, but is it available in a can to be rolled or sprayed on a wall? I’ve been looking for a product to give a super glossy finish on interior walls (drywall, etc). Thank you!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Answer
Seymour Paint –
Sorry, we don’t offer it for roll-on applications.